All Products

SKU: AF-5663

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a single byte to select the active channel and all subsequent I2C traffic is route...

SKU: AF-5631 · MPN: ADA5631

This break-apart panel gives you 12 PB86 step switch breakout PCBs, making these colourful sequencer-style switches much easier to use in a breadboard, perfboard or DIY synth build.The original switches are not breadboard or perfboard friendly, so these assembled breakouts save you from hand-wiri...

SKU: AF-3391 · MPN: 3391

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-points, so you can p...

SKU: SF-COM-09190

This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly!

SKU: LB-LR0022

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)

SKU: SF-SEN-15191 · MPN: SEN-15191

This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output into simple I2C commands so your main microcontroller does not need to handle ser...

SKU: PR-PIM582

Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...

SKU: LB-LS7051

Five-Direction Navigation Button Switch — Game On, Maker Style!Ready to level-up your next Arduino or microcontroller project? The Five-Direction Navigation Button Switch Module is your ticket to classic game controls, menu navigation, or anything else that demands precise, tactile feedback. Just...

SKU: AF-4375 · MPN: 4375

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitoring without fussing over complex wiring. Works with both 3.3 V and 5 V logic, mak...

SKU: AF-735 · MPN: 735

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...

SKU: AF-1831 · MPN: 1831

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poi...

SKU: AF-562 · MPN: 562

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: AF-1789 · MPN: 1789

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: AF-1536 · MPN: 1536

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply power and it beeps. Key Features Active Buzzer – Built-in oscillator circuit, no ...

SKU: SF-DD-18616 · MPN: DD-18616

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch GHR-05V connector is commonly found on some sensors, radios and other small devic...

SKU: SF-CAB-23353 · MPN: CAB-23353

This handy cable connects a six pin GHR-06V type locking connector to breadboard-friendly male pins, making it easier to prototype with compact modules.The 1.25mm pitch GHR-06V locking JST connector is commonly found on some sensors, radios and other small devices. It is also suited to use with L...

SKU: EC-CDD8266KIT

This kit includes a serial WiFi transceiver ESP8266 module and a breadboard adapter to make it convenient to use ESP8266 module with breadboard.ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowin...

SKU: SF-CAB-17240

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included with the RTK Surveyor product line, but the GHR connector is common and may also be seen on other products and sensors. Documents: GHR Connector Da...

SKU: SF-CAB-18078

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-05V JST is typically used in PDP, LCD, or small electronics equipment. Features: 28 AWG ...

SKU: SF-CAB-18079

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is typically used in PDP, LCD, or small electronics equipment.Features:28 AWGDocument...