All Products
Showing 21-40 of 51 products · 9 unavailable products hidden
Adafruit Neo Trinkey - SAMD21 USB Key with 4 NeoPixels
·
The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...
Adafruit CRICKIT for Circuit Playground Express
·
The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit see...
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
·
A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...
2.8 TFT Touch Shield V4.3
The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...
Adafruit PyRuler - Engineer Reference Ruler with CircuitPython
·
The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...
CrowPanel 7.0" -HMI ESP32 Display 800x480 RGB TFT LCD Touch Screen Compatible with Arduino
This CrowPanel module is a 7.0-inch HMI touch display built around the ESP32-S3-WROOM-1-N4R8, giving you a ready-to-program screen for IoT, automation and user-interface projects. The 800*480 TFT-LCD uses capacitive touch for responsive interaction, with WiFi and Bluetooth available from the ESP3...
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
·
The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into any USB-A port and you've got a single-key macro pad, password entry device, or cu...
2.8 TFT Touch Shield for Arduino with Resistive Touch Screen
·
The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
·
A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...
Red Vision Touch Display Shield for RedBoard
·
Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing external display cabling.The board is designed to stack neatly with the SparkFun Red V...
Arduino GIGA Display Shield
·
The Arduino GIGA Display Shield is a touchscreen add-on designed for the Arduino GIGA R1 WiFi. Featuring a 3.97" TFT display with 480×800 resolution and 5-point capacitive touch, it makes it easy to deploy graphic interfaces for dashboards, handheld devices, and interactive projects. Beyond the ...
Adafruit Slider Trinkey - USB NeoPixel Slide Potentiometer
·
The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program it as a volume control, brightness adjuster, colour picker, or any custom slide...
Gravity: 9 Pcs Sensor Set for Arduino
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...
3.2" 320x820 RGB TTL TFT Display with Capacitive Touch
·
This long rectangular TFT module is made for advanced display projects that need a striking, high-pixel-count screen. The 3.2" IPS panel provides 320x820 18-bit full-colour pixels, with colour that remains clear up to 80 degrees off-axis in any direction.The display uses an ST7701S driver with bo...
7-Inch DSI Capacitive Touchscreen – 1280x720, IPS, 10-Point Multi-Touch, Anti-Fingerprint
·
This 7" DSI capacitive touchscreen from Waveshare features a 1280×720 IPS panel with 10-point multi-touch, toughened glass with optical bonding, and an anti-fingerprint coating. The integrated driver circuitry connects via a single FPC cable, resulting in a slim 9.3 mm total thickness. Compatibl...
Adafruit 3.4in Square RGB-666 TTL TFT Display with Touchscreen
·
This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visibility off-axis.The display uses an ST7701S driver with SPI for configuration an...
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
·
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...
Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)
·
The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...
Adafruit Assembled Data Logging shield for Arduino
·
The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...
Adafruit HUZZAH32 – ESP32 Feather Board
·
The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...
