All Products
Showing 1-20 of 47 products · 13 unavailable products hidden
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total driv...
4015 3-Phase BLDC Motor with AS5600 Encoder
·
This compact 4015 BLDC motor combines a high-torque outer rotor motor with a factory-integrated AS5600 magnetic encoder, making it a neat motion-control package for robotics and precision motion projects.It is designed for Field-Oriented Control (FOC), also known as vector control, to support smo...
SimpleFOCmini Brushless DC Motor Driver Board
·
This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and responsive control matter.SimpleFOCmini supports closed-loop control of motor position...
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal Motor, you can be sure of getting the best performance and reliability without ...
2208 3-Phase BLDC Motor with AS5600 Encoder - 12V 1800RPM
·
This compact 2208 three-phase brushless DC motor combines a 12V BLDC motor with an integrated AS5600 magnetic encoder, making it a practical choice for closed-loop motor control and FOC experiments. It provides 300g.cm of torque and 12-bit position feedback for smooth, low-noise motion in project...
M0601 Direct-Drive Hub Motor - Left, Integrated FOC Servo
·
The M0601 is a compact direct-drive hub motor for intelligent robots, AGVs, AMRs and other mobile platforms. It combines a brushless DC motor, servo driver and high-precision encoder into a 102mm diameter unit, reducing the need for external drivers and complex wiring.Motion control is handled wi...
.jpg)
M0601 Direct-Drive Hub Motor, Right Orientation
·
The M0601 is a compact direct-drive hub motor for intelligent mobile robots, AGVs and AMRs. It combines a brushless DC motor, servo driver and high-precision encoder in a single 102mm hub, reducing the need for external motor drivers and complex wiring.Motion control is handled with advanced FOC ...
DFRobot 2804 12V BLDC Motor with AS5600 Encoder
·
This compact three-phase brushless DC motor is built for advanced motion control projects where smooth torque, low noise and precise feedback matter. It runs at a rated 12V and combines a 2804 BLDC motor with a built-in AS5600 magnetic encoder for closed-loop control.The integrated encoder provid...
2x1.2A DC Motor Driver (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor driver — making existing L298N code directly compatible. Each channel delivers up...
Dual-Channel DC Motor Driver-12A
This is a dual channel DC motor driver with an extremely small size of of 1.97”×1.97”×0.49”. The module comes with two motor channels that can drive two motors simultaneously, and each channel employs an indicator to show the rotation direction of the motor: blue is forward rotation, red is rever...
2x7A DC Motor Driver
An ultra-compact dual DC motor driver built around a robust H-bridge design with 7 A continuous current per channel and a 50 A peak rating. Opto-coupler isolation on all control signals protects your microcontroller from motor-induced reverse currents, while built-in UVLO (Under-Voltage Latch-Out...
Direct-Drive Servo Motor for Robotics and AGV Drive Wheel (UART, 210rpm)
·
A compact direct-drive servo motor integrating a brushless outer-rotor motor, encoder, and servo driver into a single unit. By eliminating the traditional gearbox/reducer, it delivers smooth torque, low noise, and long life in a smaller package. The built-in driver uses a Field-Oriented Control ...
Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)
INTRODUCTION This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces. Both sides of the module are ...
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
·
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
Micro bit DRV8833 Motor Driver Expansion Board
The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwise rotation, anticlockwise rotation, brake, and stop. The board includes on-boa...
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
·
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it....
Gimbal Motor with Encoder - 12V, 467RPM - SparkFun Electronics
·
A compact brushless gimbal motor with an integrated AS5048A magnetic encoder for high-resolution position feedback. The 11-pole-pair design delivers smooth, precise rotation at up to 467 RPM nominal speed, making it well suited for camera gimbals, robotics, and precision motion control. Specific...
Brushless DC Motor with Encoder 12V 159RPM
INTRODUCTION This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...
Four - Channels Motor Shield For Arduino
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...
