All Products
Showing 1-20 of 78 products · 22 unavailable products hidden
Cell-phone TRRS Headset - Earbud Headphones w/ Microphone
·
These earbud headphones with a built-in microphone are a handy accessory for microcontroller projects that use a TRRS audio jack, such as the Adafruit FONA cellular module. They also work with any iOS or Android device that uses a standard 4-pole TRRS pinout. Key Features TRRS Connector – Stan...
TLV320DAC3100 I2S DAC with Headphone & Speaker Out
·
Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for compact audio builds without a separate amplifier.The board takes BCLK, WSEL and DIN...
Wired Miniature Electret Microphone
·
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly smaller and has pre-attached 65mm long wires. We don't have a specific datash...
Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout
·
The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GPRS data, and GPS geolocation — all controlled over a single serial port via AT c...
3.5mm (1/8) DIY 4-Pole (TRRS) Plug
·
A solder-on 3.5 mm (1/8") TRRS plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the four contact points and you have a custom cable ready to go. TRRS stands for Tip, Rin...
3.5mm (1/8) 4-Pole (TRRS) Audio Plug Terminal Block
·
A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal lines a...
3.5mm (1/8) 4-Pole (TRRS) Audio Jack Terminal Block
·
A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal l...
Electret Condenser Microphone with Washer
·
Add reliable audio input to your digital signal processing projects with this electret condenser microphone and stand-off washer. It has been selected for compatibility with the popular Teensy Audio Adaptor.The included custom laser-cut washer helps with convenient flush mounting directly to the ...
I2S MEMS Microphone Breakout - ICS-43434
·
Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much smaller and thinner, and this one outputs digital I2S audio rather than an analogu...
Portable 3.5mm Jack Clip-on Lapel Microphone
Capacitive microphone, professional metal lavalier mobile phone microphone, designed for mobile phonesWire: 2.0mm x 1.5mOmnidirectional microphone core -30±2dBDetachable clip4 gold-plated 3.5mm in-lineTensile shielded cable to ensure high-fidelity sound quality transmissionLow power consumption, ...
Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H
·
The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to your microcontroller — eliminating analogue noise and the need for an ADC. With...
Mini USB Microphone
·
The Mini USB Microphone is an ultra-compact plug-and-play USB microphone that requires no drivers. Simply plug it into any USB port and start recording immediately. Compatible with Raspberry Pi, laptops, desktops, and other single-board computers. Its tiny form factor makes it ideal for projects...
SparkFun Electret Microphone Breakout
The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up voice, claps, knocks, or ambient noise — the amplified signal is ready to read ...
Electret Microphone
Small electret microphone. Useful in acoustic and audio applications. Documents: Datasheet Example Audio LED control project by Adam Greig
Adafruit Silicon MEMS Microphone Breakout - SPW2430
·
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency range of 100 Hz to 10 kHz, it's well suited for general-purpose audio recording,...
Adafruit PDM MEMS Microphone Breakout
·
The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's ideal for microcontrollers without analogue inputs, and most modern 32-bit process...
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
·
A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully assembled and tested with a 20–20 kHz electret microphone soldered on. A trimmer p...
Sound Detection and Microphone Module
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound intensity, while the digital output (DO) triggers high or low based on an adjustable...
Adafruit PDM Microphone Breakout with JST SH Connector
·
The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pairs with JST SH cables for flexible microphone placement away from the main board....
I2S Microphone Module
A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an external codec, simplifying audio capture designs. An on-board SK9822 RGB LED provide...
