All Products
Showing 81-100 of 100 products
Tactile On/Off Switch with Leads
·
A tactile push on/push off switch with pre-attached wire leads. Squeeze once to turn on, squeeze again to turn off — a satisfying click-action toggle that's easy to embed in seams and fabric for wearable projects, or use as a simple power switch in any circuit. Key Features Push On / Push Off ...
2.54mm 4 Positions 8Pin Red DIP Switch
A 4-position DIP switch with standard 2.54mm (0.1") pitch, suitable for through-hole mounting on PCBs, perfboard, and breadboards. Each of the four switches can be independently toggled on or off, making it useful for setting configuration options, selecting addresses, or controlling circuit beha...
2.54mm 8-Positions 16 Pin Red DIP Switch
An 8-position DIP switch with standard 2.54mm (0.1") pitch, suitable for through-hole mounting on PCBs, perfboard, and breadboards. Each of the eight switches can be independently toggled on or off, making it useful for setting configuration options, selecting addresses, or controlling circuit be...
Mini On/Off Push-Button Switch
·
A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode toggler. The large, flat contacts are easy to solder or clip onto, and each con...
Hall-Effect Sensor - AH1815 (Non-Latching)
The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A...
Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 is designed for smartphones, tablets, wearable devices. It has built-in intellig...
Adafruit 4x4 NeoTrellis Feather M4 Kit Pack
·
Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...
USB Power Meter (Color TFT LCD)
This USB Power Meter is a versatile little tool that can provide voltage readings down to 0.01V and current to 0.001A, displayed on the built-in color TFT LCD, while your device is connected through it to a power source. You can also measure the capacity and power of battery packs/power banks as ...
RTC Data Logger Shield
The RTC Data Logger Shield adds SD card storage and a real-time clock to your Arduino, making it straightforward to log timestamped sensor data. It supports SD, SDHC, and microSD TF cards via an onboard toggle switch to select the card type. The shield is compatible with 3.3V and 5V logic levels...
2 In 1 TF Cards Dual System Switcher for Raspberry Pi
The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap between them without removing or swapping cards. The switcher can also be cont...
Spade Quick Connector Kit - 6.3mm / 4.8mm / 2.8mm
·
A 150-piece assortment of spade quick-connect terminals in three common sizes, complete with matching insulating sheaths. These crimp-on connectors are widely used in electronics for fast, secure connections to micro switches, arcade buttons, toggle switches, and other spade-terminal components. ...
Gravity: Easy Relay Module
The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting traditional relays. The input end is equipped with an adapter, which can be compatible with most power sources, battery boxes, DC ...
Tri-Color USB Controlled Tower Light with Buzzer
·
With this Tri-Color USB Controlled Tower Light with Buzzer, you can easily monitor and alert humanoids as to the status of a project, machine, or even if the bathroom is occupied!Unlike our other tower lights, no wiring or microcontroller programming is required. It's completely plug-and-play for...
Gravity: I2C H3LIS200DL Triple Axis Accelerometer Sensor (±100g/±200g)
The H3LIS200DL is a high-performance triple-axis linear accelerometer with an ultra-low power consumption of 10uA. It offers user-selectable scales of ±100g/±200g and is capable of measuring accelerations with output data rates from 0.5Hz to 1KHz. Connection DiagramFeaturesSelectable scales: ±10...
Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1.6 Hz to 1600 Hz. The sensor comes with two independent programmable interrupts and a ...
TIMI to Click Adapter
An adapter board that adds a MatesBUS interface to any development board with a mikroBUS Click socket, allowing direct connection of TIMI display modules (such as the TIMI-96). Communication between the host and the connected device uses 3.3 V asynchronous serial UART. Key Features mikroBUS Cl...
3-AAA Battery Holder, Enclosed with Switch
An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides approximately 4.5 V with three alkaline AAA batteries (3 × 1.5 V) or 3.6 V with t...
10.1" IPS Capacitive Touch Screen with RGB Animated light compatible with Raspberry Pi
A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B+/4B, Jetson Nano, BeagleBone, Banana Pi, and other development boards, as well ...
5 Inch Display for Raspberry Pi
This 5-inch HDMI-compatible display features an 800×480 TFT-LCD panel with 5-point capacitive touch, making it a versatile monitor for Raspberry Pi projects, mini PCs, and single-board computers. Touch input works over USB with no driver installation required — just plug and play. The display in...
Adafruit Switchable USB Type A to C Breakout Board
·
The Adafruit Switchable USB Type A to C Breakout Board lets you individually enable or disable each of the four USB wires (V+, D+, D−, GND) using an onboard 4-position DIP switch. This makes it a versatile tool for USB debugging, charge-only configurations, and power monitoring. Key Features 4...