All Products
Showing 81-100 of 100 products
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
·
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port
·
The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for significantly better range — ideal for projects where the board is enclosed in a metal...
Adafruit Matrix Portal S3 CircuitPython Powered Internet Display
The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start codi...
XRP Motor to Breadboard Jumper Cable - 6in. (6-pin JST-SH)
This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other. This cable was designed to allow users to easily breakout the pins from the motor connectors on the XRP control board.
Adafruit Sparkle Motion with wFL External Antenna
·
The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle Motion — dual power options, three level-shifted LED outputs, built-in audio and ...
QSPI DIP Breakout Board - W25Q16 16Mbit / 2MB
·
This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-friendly 0.3" wide DIP format, which is handy when you want to test different fla...
2mm Pitch 40-Pin Break-apart Male Headers - Pack of 5
·
These 2 mm pitch 40-pin break-apart male headers are designed for modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 40-pin strips that can be easily snapped apart to your desired length. Gold-plated contacts ensure reliable connect...
Adafruit WCH CH9102F Friend - USB to Serial Converter
·
The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATmega328 boards — no manual pin manipulation needed. The pinout matches standard F...
edge:bit for micro:bit (edgebit)
Edge:bit is a breakout board for protecting your micro:bit golden finger. The special designed golden finger brings more convenience to micro:bit extension. But, at the same time, it is easily abraised or scratched by aligator clip. Edge:bit can provide an all-around protection for your micro:bit...
SparkFun Power Delivery Board - USB-C (Qwiic)
The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard USB connection, this board can request higher voltages — typically 5–20 V and up...
Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header
This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple to identify pins at a glance. Since the Raspberry Pi 400's GPIO header faces out...
Encoder Adapter
INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. This adapter integrates an external pull-up resistor, which raises the outpu...
SparkFun SOT23 to DIP Adapter
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages. DIP width is 0.300" (300mil) and will fit nicely into any breadboard or DIP socket. 40...
Adafruit FPC Stick - 20 Pin 0.5mm/1.0mm Pitch Adapter
·
The Adafruit FPC Stick is a double-sided adapter PCB for connecting to 0.5 mm or 1.0 mm pitch flat flexible cables (FPCs). One side accommodates 0.5 mm pitch connectors, while the other handles 1.0 mm pitch — and it can also work with some 2.0 mm pitch connectors. Each of the 20 FPC pads breaks o...
CP2102N USB-to-Serial Adapter Carrier
This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, providing access to all control signal pins and GPIO pins. It serves as a conveni...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
·
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
Fermion: 1.51" OLED Transparent Display with Converter (Breakout)
This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56. There is a small section near the pins that are not transparent but still can display content), full-view, and blue disp...
Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...
Adafruit Switchable USB Type A to C Breakout Board
·
The Adafruit Switchable USB Type A to C Breakout Board lets you individually enable or disable each of the four USB wires (V+, D+, D−, GND) using an onboard 4-position DIP switch. This makes it a versatile tool for USB debugging, charge-only configurations, and power monitoring. Key Features 4...
Micro:bit Expansion Board Adapter
The IO:bit is a compact expansion board for micro:bit that breaks out all I/O pins to standard headers while adding a built-in miniature buzzer. It features Lego-compatible mounting holes for integration with KittenBot and other building projects. Key Features Plug and Play – Edge connector fo...