All Products

SKU: SF-WRL-29210 · MPN: WRL-29210

This MicroMod carrier board is built around the u-blox SARA-R510AWS module and AWS IoT ExpressLink, giving your MicroMod processor a simpler path to secure AWS cloud connectivity over LTE-M. Please note that this module accepts the simplified AWS IoT ExpressLink AT command set; the regular u-blox...

SKU: SF-WRL-25134 · MPN: WRL-25134

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: AF-6303 · MPN: ADA6303

Designed for display-driven embedded projects, this Feather-format board places its 1.14-inch IPS TFT on the rear so the screen can sit neatly behind a panel or enclosure cut-out. It combines an ESP32-S3 Wi-Fi and Bluetooth LE module with three user buttons, making it a handy all-in-one option fo...

SKU: AF-5855 · MPN: ADA5855

A compact 5 V, 0.3 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resi...

SKU: ED-50102BIT-5 pack · MPN: 50102BIT-5 pack

Ozobot Bit+: the new Blockly-programmable educational robotSTEAM Made Simple – Engage 1 teacher and 5-10 studentsOzobot Bit+ belongs to the new generation of Ozobot educational robots. It's a small mobile platform you can program on Ozobot Blockly, a visual and intuitive editor suitable even for ...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: SF-WRL-20168

The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...

SKU: AF-4712 · MPN: 4712

The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for you, so your project always knows exactly how much battery is left — just like t...

SKU: AF-4800 · MPN: 4800

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boards, and information displays that only need to update periodically. Designed fo...

SKU: AF-3501 · MPN: 3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: DF-DFR0069

This DFRduino FIO is Discontinued Now, We recommend other best selling arduino boards as a suitable replacement. The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO. It is 100% compatible with original Arduino FIO. Funnel is a toolkit to sketch your idea physi...

SKU: AF-3333 · MPN: 3333

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four programming environments: Microsoft MakeCode (block/JavaScript), CircuitPython, Ardu...

SKU: AF-3405 · MPN: 3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: SF-PRT-09749

A 2-pin right-angle JST PH series connector for through-hole PCB mounting. With a 2 mm pin pitch, this is the standard connector used on most single-cell LiPo batteries, making it ideal for battery-powered projects and charging circuits. Key Features JST PH Series – Industry-standard 2 mm pitc...

SKU: AF-3403 · MPN: 3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-727 · MPN: 727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: AF-3406 · MPN: 3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: SF-DEV-10116

The Arduino Fio (Funnel I/O) is a compact, wireless-friendly development board based on the ATmega328P. Designed by Shigeru Kobayashi and inspired by the LilyPad, the Fio includes a built-in lithium polymer battery connector with USB charging circuit, and an XBee socket on the underside for wirel...

SKU: AF-1901 · MPN: 1901

A Qi-compatible wireless charging receiver module that outputs regulated 5 V at up to 500 mA. Place this module on any standard Qi charging base to receive power wirelessly — ideal for adding wireless recharging capability to Arduino projects, custom devices, and embedded builds. The module uses...