All Products

SKU: DF-SEN0211

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Pl...

SKU: TB-RG5010

A 1 nF polyester (greencap) capacitor rated at 100 VDC. Polyester capacitors offer good stability and reliability across a wide range of applications, making them a versatile choice for general-purpose circuits, filtering, and timing. Specifications Capacitance: 1 nF Tolerance: ±10% Voltage ...

SKU: AF-1886 · MPN: 1886

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials).This spool of solder contains approximately 0.6mm / .02" diameter in standard 60/40 formulation. This ...

SKU: SF-TOL-10242

We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the ...

SKU: SF-TOL-10243

We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the bes...

SKU: SF-SEN-10266

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN d...

SKU: SF-PRT-12899

A single-cell 18650 battery holder with wire leads for easy integration into projects. Drop in an 18650 lithium-ion cell and connect the bare wire leads to your circuit — no soldering to the battery required. Two 6" (150 mm) cables exit from opposite ends of the holder, terminated with bare wire...

SKU: AF-3290 · MPN: 3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: TB-RC5324

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequency filtering applications. Key Features 100pF, 50V DC – General-purpose cerami...

SKU: AF-3217 · MPN: 3217

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyping Solder Paste from IC Breakout will provide strong, flux-aided conductive bon...

SKU: SF-ROB-11015

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 4.5mm and 2 M2 mounting holes on the body.The wire lead...

SKU: AF-372 · MPN: 372

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with a simple voltage divider circuit. The epoxy coating allows the thermistor to be...

SKU: PL-1071

This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: PL-1070

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: PL-1073

This is a basic, general-purpose blue LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: DF-KIT0077

The DFRobot Soldering Starter Tool Set gives you everything you need for most soldering tasks. This set includes a 25-watt pencil iron, cast iron stand, high brightness soler tin, pliers, stainless steel tweezers and a cleaning sponges in a nylon carrying case. DFRobot carefully selected for y...

SKU: DF-FIT0362

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkaline cells for a 4.5V battery pack. The holder is made from plastic and includes ...

SKU: SF-ROB-13656

This NEMA 23 bipolar stepper motor delivers 125 oz·in of holding torque with 200 steps per revolution (1.8° step angle). Equipped with extra-long 600 mm AWG22 wires, it's designed for CNC applications where longer cable runs are needed. Stepper motors provide precise position control without the...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...

SKU: PL-2173

A male Tamiya-style high-current connector with two pre-crimped 10cm 14-AWG silicone-insulated leads. This keyed connector is commonly used with 7.2V RC battery packs and features a latch to prevent accidental disconnection. The leads extend 9cm past the housing with stripped, tinned terminations...