All Products

SKU: SF-SEN-13637

A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resistance, and a higher signal output. This version includes a 3-pin screw terminal p...

SKU: PR-PIM214

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi in the smaller pHAT form factor. With a relay, three analogue channels, buffered inputs, and sinking outputs — all 24V tolerant — it packs serious control capability into a minimal footprint. Uses the sam...

SKU: PR-PIM408

Inky wHAT is a 4.2" e-paper display HAT for Raspberry Pi, capable of showing red, black, and white. The EPD display is crisp and readable in bright sunlight, making it perfect for information displays that don't need frequent updates. The display uses electrophoresis to pull coloured particles i...

SKU: SB-21819

The Pico Air Monitoring Expansion is a HAT for Raspberry Pi Pico that measures suspended particulate matter (PM1.0, PM2.5, and PM10) in the air. It uses a PMSA003 digital laser dust sensor and includes an onboard 0.91″ OLED display for real-time readings. The board communicates with the Pico via...

SKU: AF-5783

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your Pi without counting pins or fiddling with breakout boards. The EYESPI standard ...

SKU: PR-PIM277

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto ...

SKU: AF-3411 · MPN: 3411

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal.  The Pi Zero W Starter Pack is everything you ...

SKU: PR-PIM269

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight on...

SKU: AF-4354 · MPN: 4354

The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 60 rows of breadboard-style prototyping sp...

SKU: AF-4353 · MPN: 4353

The Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit combines a compact half-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 30 rows of breadboard-style prototy...

SKU: SF-DEV-15794

The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO...

SKU: EC-DRA09012K

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapter, GPIO breakout cable, and a full set of header strips. Key Features USB OTG...

SKU: PR-PIM175

The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal for robotics, games, science experiments, and learning electronics with the Pi. K...

SKU: DF-DFR0828

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is time-consuming and inefficient. Now in order to solve this problem, we designed ...

SKU: SF-SEN-24409 · MPN: SEN-24409

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and the sensor produces a higher analog SIG output.For quick setup, the board includ...

SKU: PR-PIM320

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once. pHAT Stack is the big brother to the Mini Black HAT Hack3r. It h...

SKU: AF-2222 · MPN: 2222

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but ...

SKU: PR-PIM301

Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button S...

SKU: PR-PIM181

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring conditions in your house, garage, or galleon. Set up a web server with Flask and ...

SKU: PR-PIM199

Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi! A more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero! We've added a heap of useful input and output options that will take your ...