All Products
Showing 81-100 of 100 products
Power Resistor Kit - 10W (25 pack)
Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amou...
SparkFun gator:bit v2.0 - micro:bit Carrier Board
The SparkFun gator:bit v2.0 is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips connect to so you can get the ...
Quad Bilateral Switch - Default
A quad bilateral analogue switch IC (M74HC4066B1R) containing four independent SPST switches in a single 14-pin DIP package. Each switch is normally open and closes when a logic-high voltage is applied to its control pin, making it useful for microcontroller-controlled signal routing, audio switc...
ScanaQuad Logic Analyzer Pattern Generators - SQ50
ScanaQuad Logic analyzers and ScanaStudio software let you capture digital signals, analyze them in depth or generate test patterns. That will help you get your embedded system up and running, quickly! Capture + Generate ScanaQuad Logic analyzer lets you capture, generate or do both simulta...
ScanaQuad Logic Analyzer Pattern Generators - SQ100
ScanaQuad Logic analyzers and ScanaStudio software let you capture digital signals, analyze them in depth or generate test patterns. That will help you get your embedded system up and running, quickly! Capture + Generate ScanaQuad Logic analyzer lets you capture, generate or do both simultaneo...
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch...
STS-Pi - Build a Roving Robot!
5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship! This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers! The kit is a great way to introduce yourself to robots and controlli...
SparkFun gator:color ProtoSnap
The SparkFun gator:color ProtoSnap is a gator-clip-friendly LED board designed to work directly with the BBC micro:bit. It features six snap-apart LED boards in multiple colours that can be used as a complete panel or broken apart for individual placement in your project. Power the LEDs simply b...
SparkFun gator:bit
The SparkFun gator:bit is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out o...
SparkFun Qwiic Keypad - 12 Button
Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembled and makes the development process for adding...
Arduino MKR 1010 WIFI
Want to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BL...
Adafruit PiRTC - Precise DS3231 Real Time Clock for Raspberry Pi
·
The Adafruit PiRTC Precise DS3231 is a high-accuracy, battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header. Built around a genuine Maxim DS3231 with an integrated temperature-compensated crystal oscillator (TCXO), it delivers exceptional timekeeping accuracy — f...
M5StickC ADC HAT ADS1100
Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, delta-sigma A/D converter. Extremely easy ...
Kitronik Lesson in a Box Visual Computing Pack for micro:bit
Designed by Teacher's and tested by Pupil's to save you time when teaching Visual Computing at KS3/KS4 (US equivalent - Grades 6-8/9-10).Description:The Lesson in a Box Visual Computing pack for micro:bit, available separately here, is a complete set of parts & teaching resources to enable s...
10 pcs DIY 35cm Alligator clips connection cable for BBC micro:bit
A set of 10 alligator clip cables designed for the BBC micro:bit's edge connector pins. Each 35cm cable has clips sized to grip the micro:bit's 0, 1, 2, 3V, and GND pads, making it easy to connect external components without soldering or a breakout board. The pack includes two of each colour — b...
Raspberry Pi 3B+ Case with Cooling Fan + Heatsinks
This case is specially designed for Raspberry Pi 3B+, and it is compatible with Raspberry Pi 3/ 2 Model B. The unique fit design allows the Raspberry Pi to be better placed, it is easy to install. It comes with a cooling fan in it and 3 pieces aluminum heat sink for your Raspberry Pi better heat ...
Replacement CSI/DSI Connector for Raspberry Pi - Repair Part
·
A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...
Relay 4 Zero - 4-Channel Relay Board for Pi Zero
The Relay 4 Zero provides a solution for controlling low and medium current/voltage devices with your Raspberry Pi Zero (or any 40-pin Raspberry Pi).It's a nice solution for controlling devices that can't be directly controlled by the Raspberry Pi's digital I/Os (GPIO). The standardised...
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
·
The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview ...
