All Products
Showing 41-60 of 94 products
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
Grove Cable Pigtail - 2mm pitch 100mm long
·
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...
ELECFREAKS Grove 4Pin Adapter Cable
Specially designed to connect to Grove sensors, can be used on sensor:bit, octopus:bit, or other expansion boards. Used to connect IIC devices
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
Grove - Alcohol Sensor
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector. Specifications Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Inter...
Grove to Octopus Cable
Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
·
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
Grove Vision AI v2 Kit - with Raspberry Pi OV5647 Camera Module and Seeed Studio XIAO
A high-performance, MCU-based smart vision module powered by the Himax WiseEye2 HX6538 processor, featuring a dual-core Arm Cortex-M55 with an integrated Arm Ethos-U55 neural processing unit. With Arm Helium technology optimised for vector data processing, it delivers strong ML and DSP performanc...
Grove - Mini Fan v1.1
Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be ...
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
·
The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...
Grove-T Connector (5pcs)
Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard prot...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
RB Link
The RBLink is a development and debugging board for the RedBear Duo, designed for use with the Broadcom WICED SDK. It features an ST-LINK/V2 debugger, USB drag-and-drop programming, and eight Grove-compatible connectors for rapid prototyping with Seeed's Grove sensor and actuator modules. With s...
mbed Shield
The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
·
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
TensorFlow Lite for Microcontrollers Kit
·
Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine ...
M5Stick-C IoT Development Kit with 2 Sensors + Watch Accessories
·
The ESP-32-based M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly battery and charge circuitry, 0.96" color TFT display, various sensors (IR tran...
Adafruit MONSTER M4SK - Two Eyes are Better Than One!
·
The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives two 240×240 pixel IPS TFT displays with smooth, real-time 3D eyeball animations ...
ESP32 GREY Development Kit with 9Axis Sensor
Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor, you can include posture detection in your work : accelerated speed, angulation...
180° Infrared Refletive Unit (ITR9606)
The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...
