All Products
Showing 41-60 of 89 products
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
Maker Pi RP2040 - Motor and Robot Controller
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...
Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz
·
The Feather 32u4 RFM96 LoRa Radio (433 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver operating at 433 MHz, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with ...
Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi
·
The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, giving you instant terminal access to the Pi's console — perfect for headless set...
Replacement CSI/DSI Connector for Raspberry Pi - Repair Part
·
A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...
Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi
·
The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...
Adafruit PiRTC - Precise DS3231 Real Time Clock for Raspberry Pi
·
The Adafruit PiRTC Precise DS3231 is a high-accuracy, battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header. Built around a genuine Maxim DS3231 with an integrated temperature-compensated crystal oscillator (TCXO), it delivers exceptional timekeeping accuracy — f...
Adafruit MagTag Starter Kit - ADABOX017 Essentials
·
The Adafruit MagTag Starter Kit bundles everything you need to get started with the MagTag WiFi E-Ink display. The ESP32-S2-powered board features a 2.9" grayscale E-Ink screen that retains its image even when power is removed — perfect for low-power IoT dashboards, status boards, and information...
Adafruit PiTFT - 320x240 2.8 TFT+Touchscreen for Raspberry Pi
·
The Adafruit PiTFT 2.8" is a colour touchscreen display designed for the Raspberry Pi. Featuring a 2.8-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it works as a mini console, X Window display, image viewer, or video player — all driven over the Pi's high-speed SPI int...
Assembled DC Motor + Stepper FeatherWing Add-on
·
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
·
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...
Grove Shield FeatherWing for Particle Mesh and all Feathers
·
The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feathe...
Rugged Metal Pushbutton with Black Finish - 16mm 6V RGB Latching
·
A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal for enclosures. The flat metal actuator latches on press and releases on a second...
ESP32-C3-DevKit-RUST-1 - 4 MB Flash
ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application ...
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
·
This compact breakout provides electrical isolation between two sides of an I2C bus, helping separate earth-grounded circuits, reduce noise, or protect sensitive low-voltage monitoring equipment from faults cascading across the bus.The ISO1540 is fully bidirectional, supports clock stretching, an...
Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
·
The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phone and device — it can read and write to NFC/RFID tags and cards of Type 1 throug...
Adafruit INA260 High or Low Side Voltage, Current, Power Sensor
·
The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it handles up to +36V DC at 15A continuous — delivering better than 1% accuracy over I2...
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython or Arduino - Low Cost Version
·
The Adafruit PyBadge LC is the low-cost version of the PyBadge — a credit-card-sized development board with a colour TFT display, game-style buttons, and a built-in speaker. It runs MakeCode Arcade games, CircuitPython programs, or Arduino sketches on the same ATSAMD51 processor as the full PyBad...
OBD Plug (16-pin) to DE-9 (DB-9) Socket Adapter Cable - 1 meter long
·
Not to be confused with ODB, OBD stands for On Board Diagnostics and is used for analyzing and diagnosing vehicles. It's the thing your mechanic plugs into to find out why you've got a blinking engine light.Technically, OBD uses CAN bus and, hey, whaddya know, we've got some CAN-capable microcont...
Bots! Robotics Engineering with Hands-On Makerspace Activities - By Kathy Ceceri
·
We are very excited to carry a new book by Adafruit Learning System author and maker Kathy Ceceri! Robots are everywhere! They vacuum our houses, work in our factories, help us learn at school, and play with us at home. They sample rocks from other planets, survey disaster zones from th...