All Products
Showing 4601-4620 of 11445 products
Food-Grade Heat Shrink - 3/8 diameter 12 long
·
We decided to stock this food-safe heat shrink specifically for people who were building beer-brewing or sous-vide projects using our waterproof DS18B20+ digital temperature sensors. This heat shrink is FDA Compliant for contact with food. The end of the sensor is stainless steel, but the jack...
Foot switch
·
Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and contains a snap switch. You can use the switch as either a "normally open" or "...
Force-Sensing Resistor: 0.6-Diameter Circle
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. Wit...
Force Sensitive Resistor 0.5
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will ...
Force Sensitive Resistor 0.5
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be ...
Force Sensitive Resistor - Long
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being appli...
Force Sensitive Resistor - Small
This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its...
Force Sensitive Resistor - Small
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approximately 2.5 kΩ at full force — making it easy to detect touch, squeeze, and weight...
Force Sensitive Resistor - Square
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be lar...
Forerunner-Tracked Chassis
This is Forerunner, an agile tracked chassis, low noise and easy to control, which could be a good partner for your tank-liked robots. High-strength aluminium alloy tank base, with delicate appearance, higher stability and longer durability.The track robot is made of engineering plastic that basi...
Four Channel Relay for Micro: bit
Do you still looking for the relay module for the Micro: bit? Here we had combined the relay with the Micro: bit and you can use Micro: bit to control 4 relays at the same time. Features Apply to Micro: bit. Four channel relay. Specifications Input voltage: 5v Load voltage and current:...
Four - Channels Motor Shield For Arduino
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...
Four Letter pHAT
Use Four Letter pHAT to display... four letter words. Not that sort! Four Letter pHAT has four 14-segment displays that you can use to display text, numbers, and a host of other characters. Its LEDs are a beautiful retro green, just like you old digital alarm clock. They're driven by the HT16K...
Four Letter pHAT
Four Letter pHAT is a Raspberry Pi add-on with four 14-segment displays in a retro green LED style, driven by an HT16K33 chip over I2C. It can display text, numbers, and a range of special characters — perfect as a readout for temperatures, times, or sensor values from boards like Enviro pHAT or ...
FPC2534 Qwiic Fingerprint Sensor
·
This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encryption, internal storage and authentication without requiring your host microcon...
FPC Breakout for Raspberry Pi 5 DSI or RP2350 HSTX
·
This compact breakout board is designed for the Raspberry Pi 5 and Adafruit RP2350 boards that use an HSTX connector. These boards use a 22-pin FPC connection to carry high-speed video data over differential pairs, and this breakout gives you a handy way to adapt that interface for a custom setup...
FPC Camera Connector - 24-Pin, 0.5mm (Bottom-Contact)
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle orientation and a surface mount termination. This connector has a current rating ...
FPV Nylon Pan Tilt Kit (Without Servo)
This lightweight nylon pan-and-tilt bracket lets you mount a small camera, sensor, or other module on two servos for full two-axis movement. Compatible with most 9–12 g micro servos, it's a quick way to add directional control to robots, drones, and FPV rigs. Key Features Two-Axis Pan & Tilt –...
Frankenstein Enamel Lapel Pin
A black and green enamel lapel pin featuring a playful take on the classic Frankenstein's monster. Made from durable enamel with a secure pin-back fastening, it adds a touch of classic horror style to jackets, bags, lanyards, and hats. Key Features Enamel Construction – Durable, high-quality f...
Freaduino MEGA2560 White Color MB_FRDN011
The Freaduino MEGA2560 is an Arduino MEGA 2560 compatible development board from ElecFreaks. It inherits the same pin layout, screw holes, and dimensions as the official Arduino MEGA 2560, so all existing shields, libraries, and code are fully compatible. Key improvements over the standard Ardui...
