All Products

SKU: AF-6391 · MPN: ADA6391

This small accessibility tool helps remove LiPoly and LiIon batteries with JST connectors from a board without tugging on the battery wires.The 3D-printed puller slips over the JST PH connector so you can line it up with the socket and gently lift it out. It is handy for anyone who finds tiny bat...

SKU: SF-PRT-09749

A 2-pin right-angle JST PH series connector for through-hole PCB mounting. With a 2 mm pin pitch, this is the standard connector used on most single-cell LiPo batteries, making it ideal for battery-powered projects and charging circuits. Key Features JST PH Series – Industry-standard 2 mm pitc...

SKU: AF-1769 · MPN: 1769

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small electronics — compatible with single-cell LiPo/Li-Ion battery leads, coin cell holder...

SKU: AF-5217 · MPN: 5217

The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...

SKU: AF-6495 · MPN: ADA6495

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin available for quick wire connections.It also adds a Stemma QT / Qwiic connector ...

SKU: AF-6091 · MPN: ADA6091

The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry support, adjustable charge rates, smart power path management, and near-MPPT so...

SKU: AF-6092 · MPN: ADA6092

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, combining power path management and regulated output in a single board. Con...

SKU: AF-6106 · MPN: ADA6106

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V supply from a single-cell LiPo battery, eliminating the need for a separate voltag...

SKU: KI-2271

A compact 2×AAA battery cage with a JST PH connector and 145 mm colour-coded leads. Designed to plug directly into the BBC micro:bit's battery socket, providing a portable power source for classroom projects and wearable builds. Key Features JST PH Connector – Plugs directly into the micro:bit...

SKU: PI-ABX00011

The Arduino MKR1000 combines a powerful 32-bit ARM Cortex-M0+ microcontroller with built-in 2.4GHz Wi-Fi and hardware cryptographic authentication — all in a compact, IoT-ready form factor. It runs at 3.3V and includes an integrated Li-Po battery charging circuit, making it ideal for battery-powe...

SKU: AF-783 · MPN: 783

A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/off switch built into the top for convenient power control. The holder features...

SKU: EF-EF10095

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, convenient power control. Key Features micro:bit Compatible – JST PH connecto...

SKU: PR-PIM557

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to the pins on the back of your Pico, plug in a suitable lithium-ion/polymer battery ...

SKU: AF-5612 · MPN: 5612

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your Pico or Pico W project on the go with the battery pack powering your circuitry....

SKU: DF-FIT0625 · MPN: FIT0625

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable battery supply.The holder includes a cover and an integrated power switch, so y...

SKU: AF-1863 · MPN: 1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that ...

SKU: AF-5398 · MPN: 5398

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in ...

SKU: SF-TOL-27923 · MPN: TOL-27923

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connector body itself, helping avoid sore fingertips, pinched wires from needle nose p...

SKU: AF-4422 · MPN: ADA4422

This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...

SKU: AF-727 · MPN: 727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...