All Products
Showing 21-40 of 100 products
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
GNSS All-Band High Precision Antenna - 5m (SMA) - SparkFun Electronics
·
The u-blox ANN-MB2 is a high-precision multi-band active GNSS antenna designed for centimeter-level positioning accuracy. Supporting L1/L2/L5/E6/B3 frequency bands across multiple satellite constellations, this antenna is ideal for demanding precision applications like RTK surveying, autonomous v...
Taoglas Steedan MA350 5-in-1 Magnetic Mount Antenna
·
The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...
Great Scott Gadgets ANT500 - 75 MHz to 1 GHz Telescope Antenna
·
The ANT500 from Great Scott Gadgets is a telescopic antenna designed for operation from 75 MHz to 1 GHz. Its length is adjustable from 20 cm to 88 cm, and it features a stainless steel construction with an SMA male connector, rotating shaft, and adjustable elbow joint. A 50 Ω general-purpose ant...
Great Scott Gadgets ANT700 - 300MHz to 1100MHz Telescope Antenna
·
ANT700 from Great Scott Gadgets is a lightweight telescopic antenna designed for operation from 300 MHz to 1100 MHz. Its total length is configurable from 9.5 cm to 24.5 cm. ANT700 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. ANT70...
RPSMA Male to SMA Female Adapter
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...
TOPGNSS TOP106 L1/L2 GNSS Surveying Antenna - TNC
·
The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna for receiving L1/L2 bands from GPS, GLONASS, Galileo and BeiDou constellations. It is suited to surveying, handheld and portable GNSS work, as well as fixed antenna installations.Inside, the antenna includes a built-in 130mm ground...
GNSS Multi-Band L1/L2/L5 Surveying Antenna - TNC (SPK6618H)
The SPK6618H is the latest advancement in GNSS antenna technology allowing tri-band (L1/L2/L5) reception for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in ground plane with significant filtering and amp...
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...
GNSS Flex pHAT with mosaic-X5 RTK & IM19 IMU
·
Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning, tilt-aware surveying, industrial robotics and autonomous navigation projects.Th...
GNSS Flex Breakout Carrier Board
·
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...
GNSS Flex pHAT with ZED-X20P & IM19 IMU
·
Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...
GNSS Flex pHAT with u-blox ZED-X20P
·
Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...
Interface Cable U.FL to SMA
A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors are gold-plated brass and the cable conductor is silver-coated copper. Includes: 1x U.FL to SMA cable 1x Locking Nut and Bulkhead Washer Features:...
SparkPNT GNSS Flex Module - LG580P
·
Add precise positioning and orientation to a GNSS Flex carrier with this LG580P-based module. It is built for high-performance navigation, combining centimetre-level RTK positioning with real-time heading data for robotics, precision agriculture and autonomous vehicle projects.The module is part ...
GNSS Flex pHAT with mosaic-G5 P3 & IM19 IMU
·
Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS receiver with a high-precision IMU for RTK positioning, attitude data and dead recko...
GNSS Flex pHAT with mosaic-G5 P3
·
Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...
GNSS Flex pHAT with LG580P RTK Heading Module
·
Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...
GNSS Flex pHAT with LG290P RTK & IM19 IMU
·
Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level positioning, tilt compensation and improved navigation through brief GNSS outages.The...
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
·
Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...
