All Products

SKU: AF-4383 · MPN: 4383

The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibrant visuals with 80° viewing angles in all directions — a significant step up fr...

SKU: AF-2242 · MPN: 2242

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropr...

SKU: AF-4098 · MPN: 4098

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.7" breakout board. The panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...

SKU: AF-2478 · MPN: 2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-2963

The Mini Skinny NeoPixel strip packs 60 individually addressable RGB LEDs into one metre, with an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB, 60 LED/m version — a lower-density option that's easier to power and ideal for projects where pixel spacing isn't c...

SKU: AF-2970 · MPN: 2970

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the black PCB version — identical specs to the white variant, just with a different-coloured flex strip for a more discreet look. Each LED is con...

SKU: AF-3356 · MPN: 3356

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creating animated eye effects in cosplay masks, props, sculptures, animatronics, robot...

SKU: AF-4777 · MPN: 4777

Add a versatile grayscale eInk display to your Feather project with this 2.9" FeatherWing. The 296×128 pixel panel supports four levels of grey — white, light grey, dark grey, and black — giving you more visual depth than a standard monochrome display while refreshing in about one second, far fas...

SKU: AF-4196 · MPN: 4196

The Adafruit 1.54" Monochrome eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel black-and-white display, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected — just like pr...

SKU: AF-4197 · MPN: 4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-2959 · MPN: 2959

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-3919 · MPN: 3919

A plug-and-play NeoPixel strip with a JST PH 3-pin connector for instant connection to STEMMA-compatible boards. This compact 0.5-metre strip has 30 individually addressable RGB LEDs at 60 LED/m density, providing tighter pixel spacing in a shorter length. Also available as a 1-metre strip at 30 ...

SKU: AF-4801 · MPN: 4801

A plug-and-play NeoPixel strip with a JST PH 3-pin connector for instant connection to STEMMA-compatible boards. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB — perfect for Hallowing, PyPortal, BrainCraft HAT, or any board with a 3-pin JST PH NeoPixel socket. Use...

SKU: AF-4494 · MPN: 4494

The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accuracy and up to ±0.002 hPa relative precision in high-precision mode — equivalent ...

SKU: AF-4195 · MPN: 4195

Add a crisp, paper-like display to your Feather project with the Adafruit 2.13" Monochrome eInk FeatherWing. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. The FeatherW...

SKU: AF-3811 · MPN: 3811

A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. This compact 0.5-metre strip has 30 individually addressable RGB LEDs at 60 LED/m density on a black flex PCB, providing tighter pixel spacing in a shorter length. Also available as a 1-met...

SKU: PR-PIM138

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin ...

SKU: PR-PIM354

The LED SHIM is a slim bar of 28 RGB LED pixels that slips directly onto your Raspberry Pi's GPIO pins — no soldering required. Its friction-fit header provides a secure connection, and at just 0.8 mm thick, it can be used alongside HATs and pHATs without interference, peeking out visibly at the ...

SKU: AF-3568 · MPN: 3568

A 4-wire cable fitted with JST-PH 4-pin female connectors on each end, approximately 150mm (6") long. These compact, latching connectors are commonly used on STEMMA boards, small rechargeable battery packs, RC receivers, tiny cameras, and other small electronic devices. The JST-PH connector clic...

SKU: PR-PIM267

The pHAT BEAT is a stereo audio add-on for the Raspberry Pi featuring dual I2S DAC/amplifiers, 16 RGB LEDs, and six tactile buttons. It delivers high-quality, amplified digital audio through two channels at up to 3W per speaker. The dual rows of eight APA102 RGB LEDs work beautifully as a VU met...