All Products
Showing 1-20 of 54 products
Thin Plastic Speaker w/Wires - 8 ohm 0.25W
·
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). We particularly like th...
Speaker - 40mm Diameter - 4 Ohm 3 Watt
·
Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power. At 40mm diameter it has a more square-ish shape, but a smaller face. Sound quality and volume are nicely sandwiched between our Thin Plastic Speaker with Wires an...
USB DIY Slim Connector Shell - A-M Plug
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...
USB DIY Slim Connector Shell - MicroB Plug
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...
USB DIY Connector Shell - Type A Socket
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
USB DIY Connector Shell - Type Mini-B Plug
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
5mm Plastic Flat LED Holder - Pack of 5
·
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel sits flush against the panel for a clean, low-profile look. Key Features Snap-F...
5mm Plastic Bevel LED Holder - Pack of 5
·
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled bezel gives a clean, finished look on any panel or enclosure. Key Features Sn...
USB DIY Connector Shell - Type A Male Plug
·
Build custom USB connections without slicing apart a cable and soldering those thin internal wires. This DIY USB shell gives you a proper Type A male plug connector with easy-to-solder tabs and a two-part snap-together plastic housing. Key Features Easy-to-Solder Tabs – Large solder points for...
RJ-12 or RJ-11 Telephone Round Panel Mount Adapter Plug
·
If you need to add a panel-mount connection for telephone-interfacing projects but don't have the time or ability to cut a custom oval or square hole, this RJ-12 or RJ-11 Telephone Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing phone kit. It's about 30mm in diame...
Round Force-Sensitive Resistor (FSR) [Interlink 402]
·
The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, low-cost way to detect physical pressure, squeezing, and weight in your projects. ...
iFixit Pro Tech Toolkit
High Performance Toolkit for All Things Repair The perfect toolkit for pros to average joes. Contains all the poking, prying, gripping, lifting, ESD safety, and screw driving tools needed to service consumer electronics. Completely re-engineered to provide all the tools that you need, an...
Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
·
After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work! This thread is 2...
PLA Filament 1.75mm, 1Kg Roll - Yellow
This yellow PLA filament is a general-purpose 3D printing material supplied on a 1kg reel. With a 1.75mm diameter, it is suitable for printers that use standard 1.75mm filament.PLA, or polylactic acid, is a bioplastic that is easy to print and produces a smooth surface finish. It has minimal warp...
White LEDs MegaPack (30 stickers)
The Chibitronics White LEDs MegaPack contains 30 white LED circuit stickers — peel-and-stick LEDs with conductive adhesive backing that let you build working circuits on paper, fabric, plastic, and other craft surfaces without soldering or wiring. Simply lay down conductive copper tape to form a ...
HDMI Round Panel Mount Plug
·
If you need to add a panel-mount connection for Ethernet, but don't have the time or ability to cut a custom oval or square hole, this HDMI Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing HDMI kit. It's about 30mm in diameter, so you can drill a hole in your wood,...
Skinny Wheel for TT DC Gearbox Motors
·
Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor wheels to go along with them.This TT DC Motor Wheel is solid, but thin, so it won't make your robot bulky. It even co...
TT Motor Encoder (Pack of 2)
·
Simple snap-on encoder wheels for TT gearbox motors. These injection-moulded plastic discs attach to the opposite end of the motor shaft from your wheel, letting you measure rotation speed using a photo interrupter sensor to count the ticks as the encoder spins. An easy, low-cost way to add spee...
PLA Filament 1.75mm, 1Kg Roll - Transparent
We've finally found the best Clear PLA filament in Australia! This is a 1kg reel of 1.75mm Clear PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general-purpose filament with smooth surface finish. This filament is very easy to print and is even b...
PLA Filament 1.75mm, 1Kg Roll - Pink
A 1 kg reel of 1.75 mm pink PLA (polylactic acid) filament for FDM 3D printers. PLA is a bioplastic that prints easily with a smooth surface finish, minimal warping, and low shrinkage — making it ideal for objects with flat surfaces, hard angles, and tight-tolerance fits. The filament ships vacu...