All Products

SKU: AF-1566

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...

SKU: AF-4288

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...

SKU: WS-25567

The UPS HAT (D) is a powerful uninterruptible power supply designed for Raspberry Pi, offering seamless charging and power output with dynamic path management. This HAT provides stable 5V output, ensuring uninterrupted operation for your Pi projects. It supports 21700 Li-ion batteries (not includ...

SKU: AF-1994

This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....

SKU: DF-DFR0852

A 4-channel USB buck converter module with built-in fast-charge protocol support. Accepts 6–32V input and provides adjustable 3–12V output (default 5V) across four independent USB ports, each capable of triggering fast-charge negotiation for compatible devices. The module automatically negotiate...

SKU: SF-WRL-25134 · MPN: WRL-25134

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...

SKU: AF-2190

The VERTER is a buck-boost DC-DC converter that accepts 3–12 V input and outputs a stable 5.2 V — ideal for powering Arduino, Raspberry Pi, and other 5 V electronics from a wide variety of battery packs. The slightly elevated 5.2 V output provides headroom for voltage drop across USB cables and c...

SKU: WS-19485

4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...

SKU: DF-DFR0528

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...

SKU: DF-DFR0969

A dual-slot 18650 battery holder with built-in charging and regulated power outputs, perfect for powering microcontrollers, sensors, and portable electronics projects. Simply install two 18650 lithium batteries and use the multiple 5V and 3.3V output ports to run your devices. The holder feature...

SKU: AF-1903

The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output provides headroom for cable resistance and high-current draws, preventing brown-...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: DF-DFR0580

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This medium-power high-efficiency solar power management module allows you to charge...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: AF-5807 · MPN: ADA5807

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines to request a suitable PD voltage.You can configure it with solder jumpers for f...

SKU: AF-5705

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member of the fourth generation of Witty Pi, and it is designed to work with 3.7V Lith...

SKU: DF-DFR0547-1 · MPN: DFR0547-1

This compact LattePanda kit is a pocket-sized, low-power single board computer for projects that need a full desktop operating system in an embedded form factor. The supplier lists it as the Win11 Pro activated configuration, with support for Windows 10, Windows 11, Linux and Android depending on...

SKU: AF-1578

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: EC-CRV12014K-CRV12414P

The CrowView Note is a laptop-style portable monitor with an integrated 14" display, keyboard, touchpad, speakers, and 5000mAh battery. Connect it to smartphones, Raspberry Pi, Jetson Nano, mini PCs, or gaming consoles to create an instant workspace anywhere. With full-featured USB-C connectivit...