All Products

SKU: SF-TOL-29532 · MPN: TOL-29532

This pre-fluxed copper desoldering braid is made for removing solder from joints, pads and small mistakes like solder bridges. Place it over the solder, heat it with your soldering iron, and the activated flux plus the braid’s capillary action draws molten solder into the wick.It is handy for rew...

SKU: SF-TOL-29531 · MPN: TOL-29531

This Techspray solder wick is a pre-fluxed copper desoldering braid for removing solder from PCB joints, pads and accidental solder bridges. It is a handy bench consumable for component replacement, PCB rework, repair and prototyping.To use it, place the wick over the solder joint and apply your ...

SKU: AF-4456 · MPN: 4456

A 0.8mm-wide copper desoldering wick for removing excess solder from PCB pads and joints. The narrow width makes it particularly suited for surface-mount (SMT) work, where precision is essential. Place the wick over the solder joint, apply heat with your iron, and the wick absorbs the molten sold...

SKU: SF-TOL-09327

Solder wick (also known as desolder braid) is made from braided copper threads treated with flux. When placed over an unwanted solder joint and heated with a soldering iron, the flux activates and draws the molten solder up into the braid by capillary action — cleanly removing solder from pads, b...

SKU: SF-TOL-29533 · MPN: TOL-29533

This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on PCBs.To use it, place the braid over the solder joint and apply your soldering i...

SKU: SF-TOL-29534 · MPN: TOL-29534

This desoldering braid is a pre-fluxed copper wick for removing solder from joints, pads and accidental solder bridges. Place the braid over the solder, apply your soldering iron, and the activated flux plus the braided copper construction draws molten solder up through capillary action.It is han...

SKU: SF-TOL-09162

This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb

SKU: AF-1597 · MPN: 1597

This professional-grade solder sucker features a machined aluminium body and a replaceable silicone rubber tip that won't melt on contact with hot solder joints. The smooth spring-loaded action provides reliable, powerful suction for clean desoldering every time. A significant upgrade from stand...

SKU: SF-KIT-13708

The SparkFun Learn to Solder Simon Says kit combines a classic Simon Says game with a complete introduction to through-hole soldering. All components are through-hole, making it an excellent starting point for beginners. The kit includes everything needed to build the game — soldering iron, solde...

SKU: LB-LS6515

Introducing the must-have tool for any soldering project - the Professional Silicone-Tip Solder Sucker! With its unique design and high-quality materials, this solder sucker is the perfect addition to any DIY enthusiast or professional's toolkit.Featuring a durable silicone tip, this solder sucke...

SKU: LB-LS2788

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to join the wires while the polyolefin tubing shrinks and the hot-melt adhesive se...

SKU: SF-TOL-08775

Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone’s diagonal cutters for a minute, but you’d better ask before touching their solder wick. Solder wick is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it i...

SKU: SF-TOL-09325

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solder, we recommend you order the leaded solder...

SKU: AF-145 · MPN: 145

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.031" diameter, 60/40 'no clean' rosin core. Good for all through-hole soldering and some larger...

SKU: SF-TOL-09317

This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but soldering flat on a table works just fine. Then again, the desk is starting to loo...

SKU: DF-FIT0230

A tube of leaded solder wire with 2% silver content. The compact tube packaging makes it easy to hold while soldering, keeping your fingers safely away from the iron. Lightweight and portable at just 17 g, with approximately 3 m of solder wire. Specifications Composition: Sn 62%, Pb 37%, Ag 2%...

SKU: SF-TOL-13203

The Solder Vacuum, a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally ...

SKU: SF-TOL-13246

This lead-free tip tinner cleans and re-tins soldering iron tips to restore proper heat transfer and wetting. The mild acid compound removes baked-on residue and oxidation, extending the life of your soldering tips and improving solder flow. Simply dip your hot soldering iron tip into the tinner...

SKU: LB-LS01030

The solder vacuums are a great tool for solder rework. They allow you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The pisto...

SKU: AF-4207 · MPN: 4207

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerful soldering iron & some patience. All you have to do is put a 4.25mm hole with ...