All Products

SKU: AF-852

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: DF-FIT0219

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....

SKU: SF-WRL-18568

This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclosure...

SKU: SF-WRL-15114

This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus this coax is the nice stuff - approximately 1mm...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-WRL-09145

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide

SKU: WS-8781 · MPN: 8781

Enhance your positioning accuracy with our high-performance GPS External Antenna, designed with an integrated amplifier and superior ceramic technology for optimal signal capture and amplification. Suited for a multitude of positioning and navigational applications, this antenna is the perfect ac...

SKU: SF-WRL-00662

This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the our WiFly Shield.Dimensions: 4" LengthDocuments: Datasheet RF Connector Buying Guide

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: SF-CAB-22034

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...

SKU: AF-5712

The Feather RP2040 RFM69 Packet Radio (868/915 MHz) combines the RP2040 dual-core processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication. The exact frequency is software-configurable for 868 MHz or 915 MHz ISM bands. It includes a STEMMA QT connector and a uFL c...

SKU: SF-WRL-18569

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclos...

SKU: AF-920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: WS-21708

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS positioning. Connect via USB 3.1 to a Raspberry Pi, Jetson Nano, or PC for high-spe...

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: AF-1858

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP...

SKU: AF-1532

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!