All Products

SKU: RP-MAG71 · MPN: MAG71

Get Started with MicroPython on Raspberry Pi Pico (2nd Edition) is the official guide to programming the Raspberry Pi Pico using the beginner-friendly MicroPython language. Learn to write programs, connect electronic components, and build your own interactive projects from scratch. This fully up...

SKU: SF-ROB-22727 · MPN: ROB-22727

The SparkFun XRP Controller is the brain of the Experiential Robotics Platform (XRP), a hands-on educational robotics system designed for middle and high school students. Built around a Raspberry Pi Pico W, it provides WiFi and Bluetooth connectivity, a 6-axis IMU, dual motor drivers, and a Qwiic...

SKU: RP-SC0918 · MPN: SC0918

IN STOCK NOW!The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireles...

SKU: WS-19653

This 0.96″ LCD Display Module is designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header — no soldering or breadboard required. The 160×80 IPS panel delivers 65K RGB colours with wide viewing angles, driven by the ST7735S controller over SPI. Beyond the display, the ...

SKU: AF-5907 · MPN: ADA5907

The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG solid or stranded core wires to any of the 40 terminal blocks — one for each pi...

SKU: WS-19343

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — doubling your prototyping capability without rewiring. Features clear pinout la...

SKU: WS-19579

A 1.8" LCD display module designed for the Raspberry Pi Pico, featuring 160 × 128 resolution and 65K RGB colours. It plugs directly onto the Pico via an onboard female pin header — no soldering required. Driven by the ST7735S chip over SPI, this display uses minimal IO pins and comes with C/C++ ...

SKU: RP-PICO-W-ELEC

If you're looking for a Raspberry Pi Pico W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico W.The components of this Pico W Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, tha...

SKU: WS-25509

The Waveshare Pico-DVI-LCD is a 7" IPS display module designed for the Raspberry Pi Pico. Featuring 1024×600 resolution and a 170° viewing angle, it connects via DVI interface for high-speed communication and includes an onboard 40-pin header for direct Pico attachment. The module comes with Ras...

SKU: PR-PIM580

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a compact user interface device for readouts, menus, notifications, or generative art...

SKU: RP-PICO-HEADERS

The Raspberry Pi Pico is a compact, low-cost microcontroller development board built on the RP2040 — Raspberry Pi's own custom ARM silicon. This version comes with headers pre-soldered and a Micro-USB cable included, ready to use straight away. Powered by a dual-core ARM Cortex-M0+ processor run...

SKU: WS-19888

The Waveshare Pico-LCD-2 is a 2-inch IPS LCD display module designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header. With 320×240 resolution and 65K RGB colours, it delivers clear, vibrant visuals for your Pico projects. The module uses an SPI interface requiring min...

SKU: WS-19806

A compact 4-digit 8-segment red LED display module designed for the Raspberry Pi Pico. It plugs directly onto the Pico via an onboard female pin header and communicates over an SPI-compatible interface driven by an embedded 74HC595 shift register. The module comes with C/C++ and MicroPython demo ...

SKU: AF-6252 · MPN: ADA6252

A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through while providing a smooth, high-quality finish. No screws or glue required — simply...

SKU: WS-19750

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...

SKU: AF-5612

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your Pico or Pico W project on the go with the battery pack powering your circuitry....

SKU: AF-5945 · MPN: ADA5945

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of view produces natural-looking images without the barrel distortion of wider len...

SKU: SF-LCD-29766 · MPN: LCD-29766

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...

SKU: AF-5946 · MPN: ADA5946

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus adds a 5-megapixel camera with a 120-degree wide-angle lens and autofocus motor to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's built-in JPEG encoding to save photos to a microSD card or uplo...

SKU: AF-5703

The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...