All Products

SKU: SF-DEV-27876 · MPN: DEV-27876

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-solder holes, so you can connect jumper wires, headers or your own circuitry with...

SKU: SF-DEV-27877 · MPN: DEV-27877

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when working with an Alchitry board.This is the wide version, recommended for most uses ...

SKU: SF-PRT-10368

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications Pins – 3 Connector – JST RE on both ends Pitch – 0.1" (2.54 mm) Length – 6 in...

SKU: PL-1904

These 1×5-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable five-wire connections in a single inline housing. Compatible with male and female headers, s...

SKU: AF-4666

A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-contained — just needs power, ground, and a resistor to set the delay time. Key...

SKU: AF-5384

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...

SKU: DF-FIT0924 · MPN: FIT0924

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...

SKU: DF-FIT0897 · MPN: FIT0897

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...

SKU: LB-00185

A 10-wire splittable ribbon jumper cable with female (socket) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Female-to-...

SKU: LB-PT-26AWG

A handy workbench box containing five spools of 26 AWG silicone hookup wire in blue, black, green, red, and yellow. The super-flexible silicone insulation makes this wire much easier to work with than stiffer PVC-insulated alternatives, and it handles a wide temperature range from -60°C to +200°C...

SKU: PL-1900

These single-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Simply pair them with pre-crimped terminal wires or crimp pins to create reliable, removable connections. Compatible with male and female headers, solderless bre...

SKU: PL-1905

These 1×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable six-wire connections in a single inline housing. Compatible with male and female headers, so...

SKU: PL-1906

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire connections in a single inline housing. Compatible with male and female headers, ...

SKU: PL-1908

These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire connections in a single inline housing. Compatible with male and female headers, s...

SKU: PL-1909

These ten-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire connections in a single inline housing. Compatible with male and female headers, ...

SKU: PL-1912

These 2×4-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire connections in a compact dual-row housing. Compatible with male and female dual-r...

SKU: PL-1914

These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire connections in a compact dual-row housing. Compatible with male and female dual-...

SKU: PL-1915

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire connections in a compact dual-row housing. Compatible with male and female dua...

SKU: PL-1919

These 1×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire connections in a single inline housing. Compatible with male and female headers,...

SKU: PL-1920

These 1×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire connections in a single inline housing. Compatible with male and female headers,...