All Products

SKU: PR-PIM335

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: PR-PIM331

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-a...

SKU: SF-ROB-16328

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: PI-COM1301

A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...

SKU: PR-PIM330

Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with no tools required. Specially engineered to be just the right size for a solid c...

SKU: SF-DEV-15945

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an ...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: SF-GPS-28137 · MPN: GPS-28137

Easily add high-precision GNSS to your Raspberry Pi or favorite single-board computer with the SparkFun GNSS Flex pHAT. This carrier board is the heart of our SparkPNT Flex ecosystem, providing a solder-free, plug-and-play solution for connecting our powerful GNSS Flex modules. It's the most ...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: AF-3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Ab...

SKU: PI-COM1105

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...

SKU: AF-679

These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from red to orange to yellow, etc till they get back to red. See the video below for th...

SKU: AF-6207 · MPN: ADA6207

A warm-white LED filament shaped as the letter "P", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-FIT0834

This ultra-thin flexible LED strip from DFRobot packs 138 warm white SMD 0805 LEDs into a single metre, with an incredibly slim profile of just 2.5mm wide and 1mm thick. It's ideal for lighting tight spaces where standard LED strips won't fit. Operating at 3V, the strip is compatible with microc...

SKU: DF-FIT0495-H

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 34:1 Gearbox lengt...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-ROB0128

The Devastator is a tracked tank-style mobile robot platform built from high-strength aluminium alloy. This version 2 features upgraded metal DC gear motors for improved speed, torque, and durability compared to the original plastic-motor design, along with a load capacity of up to 3 kg. The mod...

SKU: AF-6193 · MPN: ADA6193

A warm-white LED filament shaped as the letter "C", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-FIT0381

A 10W high-power RGB LED module consisting of nine separate LED dies (red, green, and blue) on a single aluminium substrate. With a combined luminous output of up to 500 lumens, it delivers enough brightness for searchlights, stage lighting effects, and colour-mixing displays. Each colour channe...