All Products
Showing 1-20 of 47 products · 13 unavailable products hidden
Wide Input SHIM - Wide Input SHIM kit
Power your Pi with a wide range of input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it straight to your Pi's pins and st...
DC-DC Charge Discharge Integrated Module (5V/2A)
This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...
USB A Jack to 5.5/2.1mm jack adapter
This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any...
Smart Charger for 18650 4.2V Li-ion battery
A 4-slot smart charger for 18650 and other cylindrical Li-ion rechargeable batteries. Each slot operates independently, so you can charge batteries of different sizes and charge levels simultaneously. USB powered for convenient use with any standard USB power source. Built-in safety features aut...
5V 2A (2000mA) switching power supply - UL Listed
This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...
5V 2A Switching Power Supply w/ USB-A Connector
This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....
USB C PD to 2.1mm Cable with Selectable Voltage Button
·
This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select any of the available voltages to power a device that expects a 5.5mm outer diameter / 2.1mm inner diameter DC plug. Now you can get rid of all t...
Smart Charger for 18650 4.2V Li-ion battery with 2 x 18650
FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged Safe Charging Technology: Automatic stop when fully charged Cut-off voltage: 4.23...
Solar Power Manager with Panel (5V 1A)
Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...
5-Pin Type-C Male to Solderless Terminal Power Cable (30cm, 5V 2A Output)
·
This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are broken out — positive, negative, D+, D−, and shield/ground — giving full access t...
Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin headers, bridging the Raspberry Pi and Arduino ecosystems. The board includes ...
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter
This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...
UPS HAT for Raspberry Pi Zero
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...
5 Inch Display for Raspberry Pi
This 5-inch HDMI-compatible display features an 800×480 TFT-LCD panel with 5-point capacitive touch, making it a versatile monitor for Raspberry Pi projects, mini PCs, and single-board computers. Touch input works over USB with no driver installation required — just plug and play. The display in...
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch...
USB A Socket to USB Type C Plug Adapter
If you've got a computer or laptop with a USB C port, but you're itching to use one of our fancy new Trinkeys, this adapter will do an excellent job at turning that USB Type C port into a USB A port!Works great with any device that has a USB C port. These adapters don't magically give you USB C s...
WRTnode Standard Shield
This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board. WRTnode (A Mini OpenWRT Dev Board) uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome si...
