All Products

SKU: AF-982

The LV-EZ4 from MaxBotix is a compact ultrasonic rangefinder that detects objects from 0 to 254 inches (6.45 metres), with calibrated range output from 6 to 254 inches at 1-inch resolution. Objects closer than 6 inches are reported as 6 inches. The EZ4 features the narrowest beam angle in the LV-...

SKU: DF-SEN0275

The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of any sensor in the LV-MaxSonar-EZ line, making it best suited for detecting large...

SKU: SF-SEN-24049 · MPN: SEN-24049

This economical ultrasonic module provides non-contact distance measurement for range-finding and obstacle-detection projects. It measures from 2cm to 400cm, with ranging accuracy that can reach up to 3mm.Each module includes an ultrasonic transmitter, a receiver and a control circuit. The interf...

SKU: DF-KIT0020

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is able to scan upto 120 degree area with 10-400 cm (3.94-157.48") detecting range...

SKU: DF-SEN0300

A high-performance waterproof ultrasonic distance sensor with an enclosed probe, capable of measuring distances from 270 mm to 8000 mm. Based on ultrasonic echo ranging, it determines distance by measuring the time between sending a pulse and receiving the echo — no physical contact required. Su...

SKU: DF-SEN0519

The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 interface using the standard Modbus RTU protocol, making it compatible with PLCs...

SKU: DF-SEN0560

This ultrasonic time-of-flight (ToF) material detection sensor identifies surface materials by analysing the difference in ultrasonic echo energy reflected from various surfaces. It can distinguish between hard and soft materials at short range (2–10 cm), outputting results via UART or digital IO...

SKU: LB-LS6569

A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with a built-in buzzer alarm when objects get too close. The microcontroller comes ...

SKU: DF-SEN0276

The MB1009 ParkSonar-EZ-144 is an ultrasonic proximity and range sensor from MaxBotix, designed to detect vehicles within a calibrated detection zone. It reports when a target enters or leaves the zone, with both proximity and range data available via logic-level (high/low) and RS232 serial outpu...

SKU: SF-SEN-28798 · MPN: SEN-28798

  This is the HC-SR04 ultrasonic distance sensor, now in Red! This economical sensor offers non-contact measurement functionality ranging from 2cm to 400cm, with a ranging accuracy of up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. The...

SKU: AF-979

The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to 254 inches with 1-inch resolution. Objects closer than 6 inches are reported as ...

SKU: LB-LR0230

The HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It works by emitting a 40kHz ultrasonic pulse, then measuring the time it takes for the echo to return — making it ideal for obstacle detection, range fi...

SKU: DF-SEN0313

A waterproof ultrasonic distance sensor with UART serial output. The A01NYUB measures distance by timing the ultrasonic pulse echo and outputs the result directly via asynchronous serial at 9600 bps — no external signal processing needed. With the included removable bell-mouth fitted, the effecti...

SKU: DF-SEN0352

The DFRobot URM13 is a compact ultrasonic ranging sensor with an open single-probe design. It supports three communication methods — TRIG pulse (SR04-compatible), UART, and I2C — making it versatile for a wide range of applications. The sensor operates on 3.3 V or 5 V, compatible with Arduino, Ra...

SKU: DF-SEN0080

The XL-MaxSonar-WR sensor provides very short to long-range detection and ranging, in a compact, robust PVC housing, designed to meet IP67 water intrusion, and matches standard electrical 3/4" PCV pipe fittings. The sensor puts 1/2 watt of peak power into the efficient transformer driving ...

SKU: DF-SEN0208

Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! We have developed waterproof ultrasonic distance sensors with a waterproof sealed emitter. This sensor is suitable for outdoor applica...

SKU: DF-SEN0008

This small sonar ranger from Devantech offers an amazing wide range from 3cm to 6m. The SRF10 is interfaced using the IIC bus. SPECIFICATIONS Voltage-5v Current-15mA Typ. 3mA Standby Frequency-40KHz Maximum Range-6 m(236.2'') Minimum Range-3 cm(1.2'') Max Ana...

SKU: AF-3942

The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing projects. The sensor requires 5V power and the Echo return signal is 5V logic. Two 10 ...

SKU: DF-SEN0311

A commercial-grade waterproof ultrasonic distance sensor with UART serial output. The A02YYUW features a much smaller blind zone (3 cm) and wider sensing angle than many comparable sensors, plus penetration through smog and dust for reliable outdoor use. The closed separated-probe design is wate...

SKU: DF-SEN0658 · MPN: SEN0658

Bring multiple environmental measurements into one rugged field sensor for Arduino, IoT and monitoring projects. This 9-in-1 unit measures ultrasonic wind speed and direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise, PM2.5 and PM10.Ultrasonic wind sensing ...