All Products

SKU: SF-WRL-18569

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclos...

SKU: AF-851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: SF-WRL-00662

This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the our WiFly Shield.Dimensions: 4" LengthDocuments: Datasheet RF Connector Buying Guide

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: SF-CAB-22037

A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...

SKU: SF-CAB-14132

This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerful reader board. This cable is perfect for extending pre-existing cables to give yourself a better range of operations when managing your RFID proj...

SKU: SF-WRL-15597

A high-gain outdoor fiberglass antenna designed for maximum range on LoRa projects. With 5.8 dBi gain in the 860–930 MHz band, this antenna is ideal for heavy-duty LoRa base stations and long-range node deployments. Built from fiberglass and aluminium for weather resistance, it includes pole-mou...

SKU: SF-WRL-21604 · MPN: WRL-21604

The BMD-34 series is a compact, surface-mount multiprotocol RF module for low-power embedded designs needing Bluetooth 5, Thread or Zigbee connectivity at 2.4 GHz. It is based on the Nordic nRF52840 and combines an Arm Cortex-M4 with FPU, integrated radio and hardware cryptographic engine in a re...

SKU: SF-CAB-14911

This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 coaxial cable supports frequencies up to 3GHz. Specifications Connector A: N-...

SKU: AF-1661

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances are your antenna doesn't use uFL as the main connector, in which case you should ...

SKU: SF-TOL-20687 · MPN: TOL-20687

Make U.FL connector handling a little less nerve-racking with this compact extraction jig. It is designed to help connect and withdraw tiny U.FL connectors from a seated position, reducing the chance of tearing a surface-mount connector off your board.The L-shaped bending portion hooks onto the c...

SKU: SF-GPS-29363 · MPN: GPS-29363

This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomous platforms, robotics and portable surveying tools where size, weight and power ...

SKU: SF-CAB-22038

This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create st...

SKU: AF-920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: SF-GPS-29362 · MPN: GPS-29362

Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...

SKU: SF-CAB-22036

An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside. Threaded connectors provide secure mechanical connections. Specifications Co...

SKU: SF-GPS-23814 · MPN: GPS-23814

The u-blox ANN-MB1 is a multi-band active GNSS antenna supporting L1, L5, E5a, B2a, and NavIC frequency bands. Designed for high-precision positioning applications, it pairs directly with the u-blox F9 platform (NEO-F9P, ZED-F9P, ZED-F9T) and other multi-band GNSS receivers. The antenna features...

SKU: SF-GPS-29491 · MPN: GPS-29491

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...