All Products
Showing 1-20 of 53 products · 7 unavailable products hidden
Gravity: Digital Capacitive Touch Sensor For Arduino
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
MPN: DFR1184
Gravity: 37 Pcs Sensor Set for Arduino
Gravity: Capacitive Fingerprint Sensor
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
Gravity: Haptic Motor Driver for LRA Motors
MPN: DRI0056
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
MPN: DFR1036
Octopus Touch PAD Sensor
Capacitive Touch Kit For Arduino
Gravity: SCI DAQ Module with Screen (I2C)
Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic
Gravity: Digital Push Button (Blue)
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
Capacitive Touch Shield
Gravity: Arduino LPG Gas Sensor (MQ5)
Gravity: Digital Tilt Sensor for Arduino / Raspberry Pi
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
MPN: 31122
Gravity: 9 Pcs Sensor Set for Arduino
Gravity: Joystick Module V2
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
· MPN: DFR1184
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Gravity: 37 Pcs Sensor Set for Arduino
Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity s...
Gravity: Capacitive Fingerprint Sensor
A capacitive fingerprint sensor with integrated processing, storage, and matching built around the ID809 high-performance processor and IDfinger6.0 algorithm. The sensor handles all fingerprint recognition independently — registration, deletion, and verification — without external processing. Sup...
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...
Gravity: Haptic Motor Driver for LRA Motors
· MPN: DRI0056
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
· MPN: DFR1036
A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for driving standard 0–10V or 0–5V controlled devices in automation projects — lights,...
Octopus Touch PAD Sensor
The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...
Capacitive Touch Kit For Arduino
A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...
Gravity: SCI DAQ Module with Screen (I2C)
The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...
Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic
The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...
Capacitive Touch Shield
This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...
Gravity: Arduino LPG Gas Sensor (MQ5)
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...
Gravity: Digital Tilt Sensor for Arduino / Raspberry Pi
This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus not making a connection. Here is the principle of tilt sensor to illustrate how i...
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
· MPN: 31122
A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...
Gravity: 9 Pcs Sensor Set for Arduino
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...
Gravity: Joystick Module V2
The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intuitive directional input — ideal for robot control, menu navigation, and game proj...
