All Products
Showing 1-20 of 58 products · 2 unavailable products hidden
Gravity: LED Button x 5 Pack
A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital output goes HIGH when pressed and LOW when released, making them simple to read with...
Gravity: LED Button - Blue
This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interacti...
Gravity: LED Switch x 5 Pack
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interactive projects, such...
10W Super Bright LED - RGB
A 10W high-power RGB LED module consisting of nine separate LED dies (red, green, and blue) on a single aluminium substrate. With a combined luminous output of up to 500 lumens, it delivers enough brightness for searchlights, stage lighting effects, and colour-mixing displays. Each colour channe...
Gravity: CH423 I2C 24 Digital IO Expansion Module
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrupt support and 16 dedicated GPOs. The built-in current drive circuit delivers up...
Gravity: Digital Blue LED Light Module
This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too m...
Gravity: Digital Colorful Flashing LED Module
Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller controls the colors and duration randomly, which makes it shine like a colorful star....
Gravity: Digital RGB LED Module
Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the connections between modules and most of mainstream controllers such as Arduino, micro:bit, Firebeetle Series, LattePanda, and Raspberry...
Gravity:Digital piranha LED module-Blue
Piranha LED light module (Blue) , and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino, the digital pin (LOW on, HIGH off) is used to control it. The brightnes...
Gravity: LED Switch - Blue
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro: bit to realize various fun interactive projects, suc...
Gravity: Bright LED Module
INTRODUCTION The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you need is just a digital signal, you can drive it directly. Besides, the LED is so b...
Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot
A string of 40 warm white LEDs on a 4-metre wire, controlled via a digital signal through the DFRobot Gravity interface. Create fading effects with PWM or power at a fixed voltage for steady illumination. Ideal for decorative lighting, ambient displays, and creative electronics projects. Key Fea...
Gravity: Flexible 16x16 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 16x16 RGB full-color LED matrix mo...
Gravity: Flexible 8x32 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x32 RGB full-color LED matrix module...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
Gravity: I2C LCD1602 Arduino LCD Display Module (Blue)
The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...
Flexible 12V LED Strip - 480 LEDs per meter - 1m long - Blue
·
Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible LED Strips with 480 SMT LEDs per meter, soldered side-by-side, and diffused with a silicone epoxy! They look a lot like neon or incandescent tubin...
Gravity: Flexible 8x8 RGB LED Matrix
Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x8 RGB full-color LED matrix module...
Gravity I2C OLED-2864 Display
The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other microcontroller projects. The module uses the Gravity I²C interface for plug-and-...
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...
