All Products

SKU: DF-SER0059

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...

SKU: AF-5757

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids, LED strips, pumps, and motors from a microcontroller. Supplied as a PCB with ...

SKU: AF-6022 · MPN: ADA6022

DescriptionPerfect for building your custom keyboard, these "Half Height" Low Profile MX key switches are compatible with standard MX layouts and solder-free sockets, offering a significantly slimmer design. While standard Cherry MX switches have a height of 10mm above the board, these switches ...

SKU: DF-FIT0380

A 10W high-power warm white LED module with an integrated 60° focusing lens. The lens narrows the beam compared to the standard 120° version, concentrating the 500-lumen output into a tighter spot — ideal for searchlights, spotlights, and directional lighting. The module consists of nine separat...

SKU: DF-SEN0502

This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each detent to allow users visually check the real-time status of the encoder. For ease o...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6192 · MPN: ADA6192

A warm-white LED filament shaped as the letter "B", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6193 · MPN: ADA6193

A warm-white LED filament shaped as the letter "C", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6206 · MPN: ADA6206

A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6213 · MPN: ADA6213

A warm-white LED filament shaped as the letter "V", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6196 · MPN: ADA6196

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6215 · MPN: ADA6215

A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-DFR0952

This compact DC-DC boost converter steps up input voltages from 2.5V to a selectable output of 5V, 8V, 9V, or 12V (default 12V) at over 80% conversion efficiency. Two solder pads (A and B) on the front of the module allow you to configure the output voltage — refer to the markings on the back of ...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: AF-6203 · MPN: ADA6203

A warm-white LED filament shaped as the letter "L", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: DF-FIT0931 · MPN: FIT0931

##Introduction Comprised of 640 LEDs, this high-brightness flexible filament is 1200mm long and only 2mm in diameter, making it perfect for DIY lighting decoration and 360° all-angle lighting fixtures. It comes with adjustable brightness and requires a 21-24V power supply, with the positive elect...

SKU: AF-2435 · MPN: 2435

The Adafruit DotStar APA102 Warm White LED Strip (30 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent warm white light — far superior to mixing RGB to approximate white. Controlled...

SKU: DF-FIT0839 · MPN: FIT0839

This ultra-slim green LED strip is made for decorative lighting in compact electronics projects, models and robotics where ordinary LED tape is too wide. At only 2.5mm wide and 1mm thick, it can fit into narrow channels, small frames and other tight installations.The strip has 60 SMD 0805 LEDs di...

SKU: AF-4117 · MPN: 4117

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and it lights up. The silicone diffuser creates an even, continuous glow rather than ...