All Products

SKU: DF-DFR1236 · MPN: DFR1236

This development kit combines the FireBeetle 2 ESP32-C5 microcontroller board with a dedicated solderless IO expansion shield, giving you a practical platform for smart home and IoT prototypes.The ESP32-C5 brings dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, plus Bluetooth 5, Thread and Zigbee support....

SKU: EC-AMC01017B

The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...

SKU: WS-30619 · MPN: 30619

The Luckfox Pico Pi is a compact Linux micro development board powered by the Luckfox Core1106 processor. With 8 GB eMMC on-board storage, built-in Wi-Fi 6, Bluetooth 5.2/BLE, and a self-developed ISP3.2 image signal processor supporting up to 5 MP camera input, it is well suited for embedded vis...

SKU: DF-DFR0835

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 grayscale levels and partial refresh for faster screen updates. The board features 3 ...

SKU: DF-DFR0566

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: DF-DFR0604

The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry Pi via I2C for convenient analogue input reading and servo control. Digital por...

SKU: DF-KIT0194

This expansion ecosystem transforms the UNIHIKER M10 single-board computer into a fully functional AIoT development station. By leveraging the modular DFRobot Gravity interface, the kit allows for the seamless integration of over 16 distinct environmental monitors, vision peripherals, and intera...

SKU: DF-DFR1146-ENT · MPN: DFR1146-ENT

Introduction The LattePanda Mu is a compact x86 compute module powered by an Intel N100 quad-core processor, 8GB LPDDR5 memory, and 64GB storage. Designed for flexibility, it features extensive connectivity options, including 3 HDMI/DisplayPort outputs, 8 USB 2.0 ports, up to 4 USB 3.2 ports, an...

SKU: DF-DFR0868

The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...

SKU: WS-29086 · MPN: 29086

This compact ESP32-S3 development board combines a 2.8 inch round IPS LCD with touch control, WiFi and Bluetooth BLE 5, making it a handy platform for HMI, dashboard and embedded GUI projects.It uses an Xtensa 32-bit LX7 dual-core processor and includes onboard Flash and PSRAM, so it can smoothly...

SKU: DF-ROB0150

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion board changes to an exquisite creator's piece. You can turn it into a tomato timer v...

SKU: DF-DFR0979

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrupt support and 16 dedicated GPOs. The built-in current drive circuit delivers up...

SKU: DF-DFR0483

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types o...

SKU: WS-31137 · MPN: 31137

An ESP32-S3 development board with a built-in 3.5" IPS capacitive touchscreen display (320×480, 262K colours). Powered by the dual-core Xtensa LX7 processor running at up to 240 MHz with Wi-Fi and Bluetooth 5 (LE) connectivity, this board is designed for interactive IoT devices, smart home interf...

SKU: DF-MBT0012

The micro:IoT is a feature-packed IoT expansion board for the BBC micro:bit. It integrates Wi-Fi connectivity, an OLED display, motor drivers, servo outputs, and a range of I/O ports into a compact cloud-shaped PCB — everything needed to build IoT projects with minimal setup. Designed to work wi...

SKU: WS-21179

A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD display and pre-soldered pin headers — this board is compatible with the Raspbe...

SKU: DF-KIT0150

Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity s...

SKU: WS-29417 · MPN: 29417

The Luckfox Pico WebBee is a compact Linux development board built around the Rockchip RV1103 chip, combining an ARM Cortex-A7 core clocked at 1.2GHz with a RISC-V MCU. It comes bundled with a custom ABS protective case, making it ready for both bench development and embedded deployment. With 64...