All Products
Showing 1-20 of 41 products · 19 unavailable products hidden
DF15RMG Tilt Kit (20kg)
This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which requires high quality in a variety of the servo features. The DF15RMG stan...
High Torque Waterproof Metal Gear Digital Servo (20KG, 180°, IP54)
·
##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and features an internal configuration of copper gears, with the gear axis thickened to an...
FPV Nylon Pan Tilt Kit (Without Servo)
This lightweight nylon pan-and-tilt bracket lets you mount a small camera, sensor, or other module on two servos for full two-axis movement. Compatible with most 9–12 g micro servos, it's a quick way to add directional control to robots, drones, and FPV rigs. Key Features Two-Axis Pan & Tilt –...
GNSS Flex pHAT with mosaic-G5 P3 & IM19 IMU
·
Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS receiver with a high-precision IMU for RTK positioning, attitude data and dead recko...
DF15RSMG 360 Degree Motor (20kg)
This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the rob...
Strain Gauge Load Cell - 4 Wires - 20Kg
A 20 kg strain gauge load cell with four wires, featuring a metallic foil gauge bonded with epoxy to a solid aluminium bar. The aluminium constrains deflection and protects the gauge from damage. Mount one end to a fixed surface using the mounting holes, then apply force to the other end in the d...
Mini Pan-Tilt Kit - Assembled with Micro Servos
This fully assembled mini pan-tilt kit provides two-axis motion using two included micro servos (SG-90 or SG-92 type). The mechanism pans approximately 180° side to side and tilts approximately 150° up and down, giving your project a full range of directional movement. The top platform provides ...
Pan and Tilt Kit (Black Anodized) (no servos)
A black anodised pan-and-tilt assembly designed for horizontal surface mounting. Built using two DFRobot servo brackets, this kit provides two axes of rotation for cameras, sensors, or other payloads on small robots and remote-controlled platforms. The kit includes all necessary mounting hardwar...
Serial Bus 360° Pan-Tilt Camera Module – High-Torque, 2-Axis, Robot Compatible
·
Elevate your robotics and surveillance projects with the cutting-edge 360° Omnidirectional High-Torque 2-Axis Expandable Pan-Tilt Camera Module. Engineered for versatility and precision, this module is powered by robust serial bus servos and anchored by a general driver board designed with roboti...
SparkPNT FPM-T GNSS Receiver with mosaic-X5 & Tilt Compensation
·
The FPM-T is a high-precision GNSS receiver in SparkFun’s SparkPNT FP family, built around the modular Flex System. This model is supplied fully assembled with the Septentrio mosaic-X5 module installed, ready for demanding positioning work.An integrated IMU provides tilt compensation, while the r...
Pan/Tilt Bracket
This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis positioning. Key Features Two-Axis Movement – Pan and tilt control with two servo ...
RaspRover 4WD AI Robot for Raspberry Pi 5 – Dual Controllers, Metal Body, Computer Vision
·
The RaspRover is an open-source, four-wheel-drive AI robot platform powered by a dual-controller architecture. A Raspberry Pi 4B or 5 (not included) handles high-level AI processing and computer vision, while an onboard ESP32 manages motor control and sensor data in real time. Built with an all-...
Arducam Upgraded Camera Pan Tilt Platform
The Arducam Upgraded Camera Pan Tilt Platform provides a lightweight, sturdy two-axis mount for cameras commonly used with Arduino and Raspberry Pi. Two digital servos deliver smooth pan and tilt movement, while an included I²C controller board makes integration with your favourite microcontrolle...
Unassembled Mini Pan-Tilt Kit (Without Micro Servos)
An unassembled mini pan-tilt bracket kit that provides two-axis motion for cameras, sensors, or other small payloads. The mechanism pans approximately 180° side to side and tilts approximately 150° downward, depending on the servos used. This version comes without servos, so you can pair it with...
Gravity: Digital 360° Tilt Sensor for Arduino
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With digital input, this sensor can be used with an Arduino expansion board to reali...
Component Kit with Resistance Card for Arduino E2
This kit has more than 7 components for the beginners. You may learn about Arduino through using these basic projects by using your own hands. Try any circuit what you want to the Arduino and accomplish your creation.Features Various of components Universal and for Arduino Specification Box size:...
RaspRover 4WD AI Metal Robot – Dual Controllers, Computer Vision, Pi 4B Compatible
·
RaspRover Open-source 4WD AI Robot KitProduct Description:Embark on an extraordinary adventure into robotics and AI with the RaspRover Open-source 4WD AI Robot Kit. Expertly engineered for the Raspberry Pi 4B o, this robust, all-metal robot is the ultimate platform for hobbyists, educators, and i...
Raspberry Pi Zero W Pan/Tilt Camera Kit
·
Build a movable camera system around a Raspberry Pi Zero W with this kit. It brings together the Zero W, Raspberry Pi Camera Module V2 and SparkFun Pi Servo pHAT to create a pan/tilt camera for IoT projects.Use it for homemade motion-activated security systems, webcam interfaces for streaming, or...
GNSS Flex Module - mosaic-G5 P3 & IM19 IMU
·
This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomous platforms, robotics and portable surveying tools where size, weight and power ...
Channel Mount Gearbox Kit - Continuous Rotation (5:1 Ratio)
These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanical device, o...
