All Products
Showing 1-20 of 22 products · 3 unavailable products hidden
Beetle BLE - The smallest Arduino bluetooth 4.0 (BLE)
Bluno Beetle - The smallest Arduino Board is another milestone in wearable electronics device area based arduino uno, which makes DIY users have more options in the project design. It is fully compatible with Bluno in instructions and procedures, supporting Bluetooth HID and ibeacon modes.&nbs...
Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids
The Insectbot Hexa is a six-legged walking robot kit based on the Beetle BLE (Arduino-compatible with Bluetooth 4.0). Designed for kids and beginners, this DIY kit teaches soldering, assembly, and basic programming through a hands-on robotics project. Powered by three 9 g micro servos and four A...
Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device
Introducing the Beetle ESP32 C6 Mini Development Board - the perfect solution for your wireless smart wearable device needs. This compact Arduino board is based on the powerful ESP32-C6 chip and boasts a sleek design with dimensions as small as a coin (25*20.5mm). With its high-performance 160MHz...
eClip - programming Fixture
INTRODUCTION eClip is an innovative programming/testing tool specially designed for Makers. It solves the problem of prototyping wearable projects with ICSP and FTDI interfaces in limited spaces. It provides 2x4 pogo-pins function-board, which makes it much easier ...
Beetle ESP32 - C3 (RISC-V Core Development Board)
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...
Beetle - The Smallest Arduino Microcontroller
The Beetle is one of the smallest Arduino Leonardo-compatible boards available, built around the ATmega32U4 microcontroller running at 16MHz. Despite its tiny size, it delivers the full functionality of an Arduino Leonardo with 10 digital pins, 5 analogue pins, and 4 PWM outputs. With a built-in...
Beetle ESP32 Microcontroller
Is FireBeetle-ESP32 too big for your projects? Why not try our newly launched Beetle-ESP32. This Beetle-ESP32 Microcontroller of 1.38”×1.34”small size is a simplified version of FireBeetle-ESP32 and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 analog po...
Bluno Beetle Shield
INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity interface modules. It also includes a convenient external power supply and a 5-8v swi...
Beetle CM-32U4 - Compatible with Arduino Leonardo - ATmega32U4
Beetle CM-32U4 is a micro Leonardo controller with an onboard charging chip. As an upgraded version of the DFRobot Beetle Board, this board is greatly optimized in integration and usability, which makes it well applicable to Arduino projects that require compact size and long service life.Ju...
micro:Maqueen Mechanic Attachment
Note: the Maqueen robot, micro:bit and batteries are not included — this is the attachment kit only. A bolt-on mechanism that turns a Maqueen into a working machine. Each kit is a metal-gear servo, an anodised aluminium linkage and all the screws needed to fit it, so students assemble a real mec...
Beetle RP2040 Mini Development Board
·
Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation instead of spending too much time and effort on improving codes. DFRobot Beetle RP20...
Patch Test Hook (10 Pack)
These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with compact boards like the DFRobot Beetle or any module without pre-soldered headers...
Beetle Shield
The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle DOCUMENTS Wiki( Beetle shield) SHIPPING LIST ...
Beetle RP2350 Mini Dual-Core Development Board (ARM Cortex-M33 / RISC-V)
·
The Beetle RP2350 is a coin-sized development board built around the Raspberry Pi RP2350 microcontroller with a unique dual-core, dual-architecture design. Choose between ARM Cortex-M33 or Hazard3 RISC-V cores running at 150 MHz, with 520 KB of RAM and 2 MB of flash — delivering serious processin...
micro:Maqueen Plus V2 (18650) with Mechanic and micro:bit V2
·
Designed for classroom robotics, after-school projects and competitions, this STEAM robot bundle combines the Maqueen Plus V2 18650 vehicle body with a micro:bit V2 board and the micro:Maqueen Mechanic kit for forklift, push, beetle and loader builds.Maqueen Plus V2 adds more expansion options, a...
micro:Maqueen Plus V2 (Ni-MH) with Mechanic, micro:bit V2 and Gamepad
·
This STEAM robotics bundle combines the Maqueen Plus V2 robot platform with a micro:bit V2, wireless gamepad and the micro:Maqueen Mechanic kit for building forklift, push, beetle and loader-style mechanisms.The Maqueen Plus V2 is designed for classroom learning, after-school projects and robot c...
micro:Maqueen Plus V2 (Ni-MH) with micro:Maqueen Mechanic
This educational robot kit combines the micro:Maqueen Plus V2 AA vehicle body with the micro:Maqueen Mechanic set for building forklift, push, beetle and loader-style mechanisms. It is designed for micro:bit-based STEM and STEAM learning, classroom activities, after-school extension work and robo...
micro:Maqueen Plus V2 (18650) with micro:Maqueen Mechanic
Designed for classroom robotics and STEAM projects, this kit combines the micro:Maqueen Plus V2 18650 robot base with the micro:Maqueen Mechanic add-on set for forklift, push, beetle and loader builds.Maqueen Plus V2 builds on the Maqueen series with a larger body, more expansion ports, a higher-...
Plastic Project Box Enclosure for Beetle - 1.42 x 1.42 x 0.59 inch
Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for convenient installation. Aside from that, the “ears” on the enclosure allow you to easi...
micro:Maqueen Lite with micro:bit V2, Skin, Mechanic, Cable, Gamepad and Track Map
·
This classroom-friendly kit bundles DFRobot’s Maqueen Lite robot platform with a micro:bit V2 and a stack of accessories for hands-on STEAM learning. It is designed for students aged 8+ to explore graphical programming, robotics, sensors and logical thinking through a small, easy-to-use robot.The...
