All Products

SKU: DF-DFR0327

The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to all standard Arduino shields and sensors alongside the Pi's own GPIO, I2C, SPI, ...

SKU: LB-LR0601

This VGA expansion board adds a VGA output to your Raspberry Pi via the GPIO header, while leaving the HDMI connector free for a second display or other use. Compatible with Raspberry Pi 3B, 2B, B+, and A+. Setup requires a simple configuration change — just add a few lines to your Pi's config.t...

SKU: PR-PIM357

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic...

SKU: DF-DFR0028

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus not making a connection. Here is the principle of tilt sensor to illustrate how i...

SKU: AF-5704

The Witty Pi 4 is a Raspberry Pi HAT that adds a precision real-time clock, power management, and scheduling capabilities. Define ON/OFF sequences to significantly reduce energy usage in battery-powered systems, or use temperature thresholds to trigger automatic startup and shutdown. A built-in ...

SKU: WS-15154-NO-PI

This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.Game HAT Features 3.5inch IPS screen, 480×320 resolution 60 frame experience, smoothly display, no more frame loss Compatible with Raspberry Pi A+/B+/2B/3B/3B+ (Ra...

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...

SKU: AF-4377

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like Pi 4 compatibility, various front-pieces for adding LEGO brick compatibility, and...

SKU: SF-PRT-11376

A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a single Arduino. Key Features 10-Pin Female Header – Standard 0.1″ (2.54 mm) pi...

SKU: AF-5038

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF sequences via simple scripts, and fully cut power to the Pi and all USB periphe...

SKU: DF-DRI0054 · MPN: DRI0054

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: WS-16595

This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection. It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. Features...

SKU: DF-FIT0807

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...

SKU: LB-OWL

This cost-effective kit is an essential tool in exploring the everyday functions of robotics, specifically obstacle avoidance. By constructing, connecting, and coding their own autonomous vehicle, beginners and children can gain a deeper understanding and appreciation for the role of robots in ou...

SKU: DF-FIT0417

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...

SKU: WS-22383

The Zero 2W to 3B Adapter is the perfect alternative solution for your Raspberry Pi 3 Model B/B+! This adapter features pogo pin connection, allowing it to easily attach to your Pi 3B/B+ and a headphone jack that is extended from USB. With 4-channel USB ports, compatible with USB 2.0/1.1 tran...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: DF-DFR0494

An uninterruptible power supply HAT for Raspberry Pi that provides steady power during outages, protecting your system from damage and ensuring safe shutdown. Ideal for mobile applications like Raspberry Pi cameras, tablets, and field data collection systems. The board features a MAX17043 fuel g...

SKU: SF-BOB-13282

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Several of these breakouts can even be chained together to form a display or an addres...