All Products

SKU: AF-3082

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat dissipation compared to shorter heatsinks. Simply peel off the protective film a...

SKU: DF-FIT0817 · MPN: FIT0817

Keep your Raspberry Pi running cooler with this compact aluminium heatsink and fan kit for Raspberry Pi 3B, 3B+ and 4B boards. The main heatsink uses a slotted surface to help dissipate heat from the CPU.Two 7 mm 9-blade cooling fans are mounted on the large aluminium heatsink for active cooling....

SKU: AF-1043

A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal performance in a tiny footprint. The heat sink features four round fins for in...

SKU: DF-FIT0788-V2 · MPN: FIT0788-V2

##Introduction This is an Aluminum case and heat sink kit built specifically for the Raspberry Pi CM4 IoT Router Carrier Board Mini. The kit allows the Raspberry Pi CM4 IoT Router Carrier Board Mini to be safely housed within a power distribution box, eliminating concerns about short circuits on ...

SKU: AF-1493

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissipation where space is tight. The heat sink features three tall fins for increas...

SKU: AF-1515

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them perfect for tight enclosures where every millimetre counts. Each heat sink fea...

SKU: DF-DFR0767-3 · MPN: DFR0767-3

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around the Raspberry Pi Compute Module 4 series for building small, capable network appl...

SKU: AF-3083

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...

SKU: DF-FIT1015 · MPN: FIT1015

Introduction The Raspberry Pi Cooler for the Compute Module 5 is a passive heatsink designed to enhance heat dissipation, improving CPU performance while also protecting the module from mechanical damage. A layer of thermally conductive silicone on the underside ensures efficient heat transfer fr...

SKU: SF-PRT-29327 · MPN: PRT-29327

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extra clearance.The included tall 2x20 pin female GPIO header raises the HAT above t...

SKU: LB-PT22033-R

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded solid aluminum cores and a thermal pad located on top of the processor. With incr...

SKU: AF-4822

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum, and the top and bottom are soft silicone for a nice and easy-to-clean case that...

SKU: SF-PRT-25761

A compact aluminium heatsink with self-adhesive backing for easy peel-and-stick installation. Efficiently draws heat away from electronic components including ICs, voltage regulators, and processor chips to promote optimal performance and longevity. Specifications Dimensions – 23 × 23 × 10mm ...

SKU: AF-3084

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi  but is best paired with a Raspberry Pi 3 since it can run a little hot....

SKU: DF-FIT0191

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motor drivers (suc...

SKU: DF-FIT0651

Are you still bothered by the Raspberry Pi fever problem? Don’t worry, we have prepared a cooling solution for the Raspberry Pi 4B. Aluminum heat sink is adopted due to its highly cooling feature and excellent resistance to oxidation, which can effectively avoid chip over-heating problem. The ...

SKU: DF-FIT0818 · MPN: FIT0818

This heatsink kit is a simple cooling upgrade for a Raspberry Pi 4B, helping draw heat away from key components during use.The black aluminium heatsinks use a slotted surface design to improve heat dissipation, and each heatsink includes adhesive backing for straightforward installation.The kit i...

SKU: EC-RPA15030A

Here is a very cool armour case designed for Raspberry Pi, it is made of aluminum alloy with CNC machining manufacturing technology. This armour case can be used to arm your Raspberry Pi and make it have a cool combat armour. Besides that, the armour case comes with the dual fan and thermal tapes...

SKU: DF-FIT0223

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motors, motor...

SKU: PK-PT2011A

Are you still bothered by the Raspberry Pi fever problem? Don’t worry, we have prepared a cooling solution for the Raspberry Pi 4B. Aluminum heat sink is adopted due to its highly cooling feature and excellent resistance to oxidation, which can effectively avoid chip over-heating problem. The ...