All Products

SKU: AF-2038

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" white 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features ...

SKU: AF-2044

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square white 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, small animations, or status displays in your projects. Powered by the HT16K33 driv...

SKU: AF-2037

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" red 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features co...

SKU: AF-1427

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, letting you wire up any LED matrix configuration you need — up to 128 individual...

SKU: AF-2035

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" green 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features ...

SKU: AF-2039

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" blue 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features c...

SKU: AF-2040

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square blue 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, small animations, or status displays in your projects. Powered by the HT16K33 drive...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-2866

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-4121

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of cool white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-4122

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of warm white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-1611

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, providing ~3mm of silent travel with a satisfying feel. The keypads can be tiled edge...

SKU: AF-2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-3162

These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Warm White version. Check out ou...

SKU: AF-3149

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...

SKU: AF-1002

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in white makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K33 drive...

SKU: AF-6198 · MPN: ADA6198

A warm-white LED filament shaped as the letter "H", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-6274 · MPN: ADA6274

A large 44 mm square illuminated push button with a satisfying clicky micro-switch — commonly seen in arcade games of skill. The black plastic body is easy to mount on panels and enclosures, and the snap-in lamp holder accepts a standard LED for backlighting. The button comes with a clear white ...