All Products
Showing 1-20 of 53 products · 7 unavailable products hidden
Crowtail Starter Kit for Arduino
The Crowtail Starter Kit for Arduino is a beginner-friendly electronics kit built around the Crowduino Uno-SD board and the Crowtail modular connector system. With 22 plug-and-play modules and over 20 guided tutorials, it provides a structured introduction to Arduino programming and electronics —...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
Crowtail Advanced Kit for Arduino
The Crowtail Advanced Kit for Arduino is a comprehensive STEAM education kit containing 22 electronic modules and a Crowduino Uno SD board. With plug-and-play Crowtail connectors, no soldering or complex wiring is required — simply connect modules to the base shield and start programming. The ki...
Crowtail-Deluxe Kit for Arduino
The Crowtail-Deluxe Kit for Arduino is a kit for advanced learners with a basic programming foundation. It is designed to help learners diverge their ideas, learn how more complex electronic components work and program, and ultimately help them achieve their dream electronic project! The kit cont...
Gravity: 37 Pcs Sensor Set for Arduino
Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity s...
All-in-one Starter Kit for Arduino NANO R4 with 20 lessons and 16 modules
The All-in-one Starter Kit for Arduino NANO R4 is the ideal choice for starting your journey into the world of electronics and maker projects. Perfectly compatible with the Official Arduino NANO R4 board, it integrates 16 diverse sensors (15 onboard sensors and 1 humidity sensor with a Crowtail i...
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Crowtail- Meeo IOT Kit
The IOT kit will supply you with Crowtail modules, which inclueds ESP8266 NodeMCU, OLED, RGB LED, Moisture sensor, Temperature & Humidity sensor, Flame sensor, Buzzer and Relay. This kit comes from our Philippine customer, who has a platform of Internet of Things with Meeo. This kit doesn’t requi...
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both communication and backlight control. The display supports 2 rows of 16 charact...
Gravity: 9 Pcs Sensor Set for Arduino
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: Analog pH Sensor/Meter Kit V2
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD1602 requires. Compatible with both 3.3V and 5V, with no contrast adjustment nee...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
ESP8266 NodeMCU IOT Kit
Do you want to DIY some funny and practical “IOT” applications? Welcome to the world of ESP8266 NodeMCU. It’s an ESP8266 WiFi module with Crowtail interface. We will use it to make some simple application of fun with various Crowtail modules.We pick up 27 kinds of Crowtail modules to go with our ...
Gravity: Arduino LPG Gas Sensor (MQ5)
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...
Gravity: Arduino Digital Weight Sensor
A digital weight sensor kit based on the HX711 24-bit ADC, capable of measuring up to 1 kg. The HX711 is designed specifically for weight scale applications, interfacing directly with a bridge sensor to deliver precise, reliable measurements via the Gravity interface. The kit includes both the H...
Gravity I2C OLED-2864 Display
The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other microcontroller projects. The module uses the Gravity I²C interface for plug-and-...
Gravity: Analog TDS Sensor/Meter for Arduino
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the less clean the water. This sensor outputs a 0–2.3V analog signal that can be read...
