All Products
Showing 1-20 of 55 products · 5 unavailable products hidden
Zio Qwiic OLED Display (1.5inch, 128x128)
The Zio Qwiic OLED Display is a 1.5" (38 mm) monochrome OLED module with a 128×128 pixel resolution, capable of displaying up to 16 lines of text as well as graphics and animations. Two Qwiic (JST-SH) connectors on the back allow solderless daisy-chaining over I2C. The compact form factor and I2...
128x128, General 1.5inch OLED display Module
A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V and 5V logic levels. With a wide viewing angle of over 160° and true OLED cont...
Adafruit Grayscale 1.5 128x128 OLED Graphic Display - STEMMA QT / Qwiic
·
The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / Qwiic connectors for solderless I²C hookup. An on-board 3.3V regulator and 12V b...
Adafruit Monochrome 1.12" 128x128 OLED Graphic Display
·
The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...
1.5inch OLED Display Module, 128×128 Resolution, SPI / I2C Communication, Black / White Display Color
A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...
OLED Shield LCD Adapter
Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connected via the supplied cable for remote mounting. The top of the shield features an ...
SparkFun Qwiic OLED Display (0.91 in., 128x32)
·
The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
This 0.96″ RGB OLED Display Module features a 64×128 pixel resolution with 65K colours, delivering vivid and clear visuals from an OLED panel. Driven by the SSD1357 controller over SPI, it requires minimal I/O pins and comes with example code for Raspberry Pi, Arduino, and STM32 platforms. The m...
Monochrome 128x32 SPI OLED graphic display
·
A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
A compact 1.27-inch RGB OLED display module featuring 128×96 resolution and 262K colours for clear, vibrant visuals. Built around the SSD1351 driver chip with an SPI interface, it requires minimal IO pins and is straightforward to integrate into your projects. Waveshare provides online developme...
SPI/I2C Monochrome 60x32 0.5 OLED Display for Arduino
INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 screen brightness with extremely high contrast and readability; moreover, it conta...
2.23inch OLED Display Module for Raspberry Pi Pico, 128×32, SPI/I2C
A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...
White OLED Display 128x32 0.91in
·
This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...
Kitronik :VIEW Graphics 128 OLED display 128x64 for BBC micro:bit
The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any additional fixings. The board also features a micro:bit style I/O connector which mea...
0.85in IPS LCD Display 128×128 SPI, 65K Colour
·
This compact 0.85-inch IPS LCD display module gives you a small full-colour screen for embedded interfaces, status readouts and other maker projects. It uses an SPI interface, making it a practical match for microcontrollers and single-board computers with limited GPIO.Display size: 0.85 inchPane...
Monochrome 128x32 I2C OLED graphic display
·
A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...
1.32inch OLED Display Module, 128×96 Resolution, 16 Gray Scale, SPI / I2C Communication
A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...
1.54inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication - White
A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with both 3.3 V and 5 V microcontrollers. Waveshare pro...
Monochrome 0.96 128x64 I2C/SPI OLED Display
This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable ...
Monochrome 0.91”128x32 I2C OLED Display
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display appl...
