All Products

SKU: LB-LAMP-A

A pre-assembled USB-powered LED lamp kit — ready to use straight out of the box. This version comes fully soldered and tested, making it ideal for classroom activities where students design and build a lampshade without needing soldering skills. Key Features Fully Assembled – Soldered and test...

SKU: PK-PT-1362U

This compact cordless screwdriver features a 3.6V lithium-ion battery with USB charging, making it easy to recharge from any USB port — at home, in the car, or on the go. The full metal gearbox delivers 3 Nm of torque at 350 RPM for reliable driving power in a pocket-friendly form factor. The an...

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-4288

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...

SKU: SF-TOL-18627

An 8-channel USB logic analyser with sampling rates up to 24 MHz, ideal for debugging UART, I2C, SPI, and other digital communication protocols. Compatible with both 3.3 V and 5 V logic levels and powered directly via the USB Type-C connection. Works with PulseView and the open-source sigrok sof...

SKU: LB-LS2925

USB male to 2 Female cable 30cm Type#1

SKU: LB-LS4167

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a MicroUSB connector and a USB-C connector. This adapter is compatible with most U...

SKU: AF-1833

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...

SKU: SF-CAB-13244

A short 150 mm (6″) USB 2.0 Type-A to Micro-B cable, ideal for connecting development boards, chargers, and other devices within compact enclosures where a full-length cable isn't needed. Specifications Connector A – USB Type-A (male) Connector B – Micro-B 5-pin (male) Standard – USB 2.0 Le...

SKU: SF-CAB-10215

A standard USB 2.0 Type-A to Micro-B cable, 1.8 m (6 ft) in length. Micro USB is the standard connector found on a wide range of development boards, microcontrollers, and electronics accessories. Key Features USB 2.0 Type-A to Micro-B – Standard 5-pin micro USB connector 1.8 m Length – Genero...

SKU: AF-4009

This USB A to Micro-B cable looks like any other at first glance — but plug it in and dozens of tiny LEDs embedded along the cable light up in blue and green. It's functional and fully supports both data transfer and charging, while adding a satisfying glow to your setup. The LEDs are bright eno...

SKU: AF-4008

At first glance this appears to be an ordinary A to micro B USB cable. Plug it in to your device and power supply, and you get a colorful glitter of dozens of little LEDs embedded in the length of the cable.Can be used for data and charging.The LEDs are luminous but not too bright. Perfect for va...

SKU: AF-5356

This USB micro B "JIG" Dummy Plug is a small, handy device for those interested in debugging their smartphones or other devices that use the ID pin #4 for a special signal. This plug has a 300K resistor from the ID pin to ground, which can be used to resuscitate Samsung S4, S5, S6 and possibly ot...

SKU: AF-3972

Make your next custom USB cable a breeze with a USB Micro B Male Plug to 5-pin Terminal Block. If you need to connect to a device with a micro USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required! Just use a sm...

SKU: AF-6068 · MPN: ADA6068

If you need to add a compact panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB Micro B Small Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your project. The adapter can fit holes 12mm to 18mm, so you can drill i...

SKU: LB-LS0466

This USB MicroSD card reader can be use with your Raspberry Pi SD card to move a new image from your computer onto the SD card. It is great for those computers that can not take a SD card adapter. The supplied colour may vary from the one pictured. Colours include - Pink, Gold, Black, White &n...

SKU: AF-1764

Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.Comes with one fully assembled and tested mini B breakout PCB and a small stick of 0.1" header so yo...

SKU: SF-CAB-13243

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals in projects within a small enclosure is much easier these days, and most times ...

SKU: AF-3969

Make your next custom USB cable a breeze with a USB Mini B Female Socket to 5-pin Terminal Block. If you need to connect to a device with a mini USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required! Just use...

SKU: AF-4211

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or met...