All Products

SKU: DF-FIT0365

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a variety of colours. These jumper wires are perfect for breadboards, Arduino cre...

SKU: SF-CAB-13685

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.Wire length is 140mm (about 5....

SKU: SF-PRT-11709

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. The only downside to the standard jumper wires we carry is that they’re a t...

SKU: SF-PRT-11710

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only downside to the standard jumper wires we carry is that they’re a tad too thin to use...

SKU: DF-FIT0301

 INTRODUCTIONThese are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (ten wires with differ...

SKU: SF-PRT-09044

A standard 2-pin jumper shunt used to create an electrical connection between two adjacent pin headers. Commonly used to configure settings on development boards, select operating modes, or bridge header pins on PCBs. Specifications Type – 2-pin jumper (shunt) Pitch – 2.54 mm (0.1") standard ...

SKU: DF-FIT0215

A 300 mm (12") ribbon cable made of ten colour-coded jumper wires, each with female headers already attached at both ends. The wires can easily be pulled apart for individual use, making them versatile for breadboard and prototyping work. Key Features 10 Colour-Coded Wires – Easy identificatio...

SKU: SF-PRT-09140

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of ten jumpers (colors shown).Dimensions: 155mm +/-5...

SKU: SF-PRT-09194

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. The slim connector housings allow multiple jumpers to be installed side by side o...

SKU: SF-PRT-14284

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female-to-female jumpers to create a male-to-female jumper. Multiple jumpers can be installed next to one another on ...

SKU: DF-FIT0154

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identification. The stiff, durable pins resist bending and breaking during repeated insertio...

SKU: DF-FIT0140

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pins together! Yes!SPECIFICATIONS  QTY: 600 Color: Black, Yellow, Blue, Green...

SKU: DF-FIT0121

Jumper wires are one of the most important gear component for the tinkerer. Often underestimated, but one of the first things to miss. If you are starting to assemble your tinker gear and wondering if this is really needed, doubt not, this is at some point or another always used. Wire or pieces o...

SKU: DF-FIT0122

This is a time saving kit of jumper wires - cut, stripped,bent 90 degree on both ends for easy insertion and your prototyping pleasure.Make your prototyping neat and looks nicer, The box included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, ...

SKU: DF-FIT0030

These 23 cm (9″) female-to-female jumper wires are a prototyping essential. Use them to connect between male headers on Arduino boards, IO shields, sensors, and breadboards. Multiple wires sit neatly side by side on standard 0.1″ (2.54 mm) pitch headers. Key Features Female-to-Female – Connect...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: LB-LR0293-30

These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight ...

SKU: LB-LR0293-29

These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight in...

SKU: AF-3858 · MPN: 3858

A 2×AA battery holder with premium jumper header wires that plug directly into a breadboard — no stripping, twisting, or fighting with thin leads. Two AA batteries in series provide approximately 2.5V to 3V, making this a convenient power source for breadboard prototyping. Key Features Breadbo...

SKU: AF-3905 · MPN: 3905

This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — no stripping or soldering required for prototyping. The square 2×2 configuratio...