All Products

SKU: SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and four 4-40 screw inserts to connect and...

SKU: SF-DEV-16791

With a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The provides you with an economical and easy to use development platform if you're needing more power with minimal working space. With the M.2 MicroMod conn...

SKU: SF-DEV-17713

The SparkFun MicroMod STM32 Processor Board brings the power of the STM32F405 ARM Cortex-M4 microcontroller to the MicroMod ecosystem. Operating at up to 168 MHz with a hardware floating point unit (FPU) and full DSP instruction set, this processor board delivers serious performance in a compact ...

SKU: SF-DEV-17725

The SparkFun MicroMod Update Tool is built to interface with the MicroMod Asset Tracker Carrier Board and also makes it simple to communicate directly with the u-blox SARA-R510M8S module using u-blox’s sophisticated m-center cellular evaluation software. If you’re familiar with u-center, u-blox’s...

SKU: SF-WRL-18594

The SparkFun MicroMod DA16200 Function Board adds fully integrated Wi-Fi connectivity to any MicroMod project. Built around the DA16200 module with an Arm Cortex-M4F processor, it includes a 40 MHz crystal oscillator, 32.768 kHz RTC, 4 MB flash memory, and an on-board chip antenna — everything ne...

SKU: SF-WRL-18430

The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.At the core ...

SKU: SF-LCD-13003

The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino projec...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: SF-SEN-19833

The SparkFun Qwiic Micro Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 21-bit) and uses a gel-filled cavity to provide extra resistance to liquids (water and other chemicals). This makes it a great option for...

SKU: SF-DEV-12761

The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses the SPI interface. The SCK, DI, and DO pins connect to the ATmega168/328's stan...

SKU: SF-TOL-09419

The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...

SKU: SF-BOB-00544

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested. The bare socket...

SKU: SF-SEN-21273

The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics and housed in our Qwiic Micro form factor. Thanks to its factory calibration the STTS22H offers high-end accuracy...

SKU: SF-SEN-21207 · MPN: SEN-21207

The SparkFun Qwiic BMA400 Micro Triple Axis Accelerometer Breakout offers a 3-axis acceleration sensor perfect for ultra-low-power applications on an easy-to-use Micro Qwiic format breakout board. Dubbed the first "real" ultra-low power acceleration sensor, the BMA400 is perfect when used in both...

SKU: SF-DEV-12924

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rapsberry Pi,...

SKU: SF-DEV-12898

The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynch...

SKU: SF-DEV-09627

Developed by Dave Vondle and IDEO Labs, this board is essentially the same as our Power Driver Shield, but the through-hole parts have been switched out for smaller SMD construction, allowing you to to drive high-current switches with your Arduino Pro Mini. This is a great shield for small p...

SKU: SF-TOL-09146

This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.

SKU: SF-ROB-25167 · MPN: ROB-25167

The SparkFun Mini Stepper Motor Driver empowers you to control bipolar stepper motors with ease and precision. This compact driver, measuring just 0.6in. by 0.8in. with breadboard-friendly 0.1in. pin spacing, shines in space-constrained projects and prototyping applications. Getting started is a ...

SKU: SF-SEN-22639

The SparkFun Qwiic Mini Tristimulus Colour Sensor features the OPT4048DTSR from Texas Instruments — a high-speed, high-precision four-channel colour sensor with spectral responses closely matching the CIE 1931 tristimulus spectra. It measures light intensity (lux), colour in CIE XY and LUV coordi...