All Products

SKU: RP-SC1148-TABS

Broke your rivets? - get a spare!

SKU: AF-997

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and w...

SKU: AF-3984

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small st...

SKU: AF-3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: AF-5773

Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and accessories without soldering directly to cables or cutting the connectors off. Since...

SKU: DF-FIT0475

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and antenna. Printed assembly instructions are provided and case assembly can be complete...

SKU: M5-K023

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, and humidity — making it ideal for air quality monitoring deployments. The PMSA00...

SKU: AF-3686

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness...

SKU: AF-4505

The PMSA003I is a compact particulate matter sensor that measures PM1.0, PM2.5, and PM10.0 concentrations using laser scattering. Unlike most PM sensors that use UART, this version features an I2C interface, making it straightforward to use with Arduino, Raspberry Pi, and other microcontrollers w...

SKU: AF-364

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort...

SKU: AF-850

When we're on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we've found. It's so good you'll end up using it as your main multimeter! First up, this meter can measure nearly everything: it's got DC and AC voltage, resistance, diode, and beeping ...

SKU: AF-2374

Have you ever wanted comprehensive information on a diverse amount of subjects in a pocket sized, well-organized format...and not had a cell phone signal or internet connection?Look no further! This pocket reference book is actually incredibly cool - even if you have a smart phone, wear a pair...

SKU: SF-TOL-12891

A compact precision screwdriver set with seven interchangeable chrome vanadium bits, designed for working on electronics, small devices, and hobby projects. The anodized aluminium body features a knurled finger grip for controlled, precise turning. Bits store neatly inside the hollow screwdriver...

SKU: DF-DFR0365

This high power PoE injector supports Midspan MODE-B PoE power protocol, and has 30W output.It supports up to 10/100Mbps communicating speed, and 100VAC~240VAC wide range input voltage makes it work stably with different voltage standards.With PoE output, you will no longer need any external powe...

SKU: AF-3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-4552

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...

SKU: PR-PIM330

Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with no tools required. Specially engineered to be just the right size for a solid c...

SKU: AF-1969

The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a built in springy pogo pin - so you can connect to any PCB pad for 'scoping, analyzing or multimetering The clip is strong enough to grip onto a PCB,...

SKU: AF-5433

The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1" pitch spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in springy pogo pins - so you can connect to a PCB with classic 0.1" spaced pad hol...

SKU: AF-2429

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just sh...