All Products

SKU: DF-SEN0338

A high-performance night vision camera module for Raspberry Pi, built around the Sony IMX327 STARVIS sensor. Designed for excellent low-light imaging without infrared fill light, this 2MP module delivers 1080p video at 30fps with built-in ISP, 2D/3D noise reduction, and anti-fog capabilities. Co...

SKU: DF-FIT0892

A compact 720p USB camera module with a 140-degree wide-angle lens. Using the standard UVC protocol, it's plug-and-play on Raspberry Pi, NVIDIA Jetson Nano, and any system supporting USB Video Class — no driver installation required. The compact 38 × 38mm form factor makes it easy to embed in en...

SKU: DF-DFR0824

A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolated transceiver for reliable, interference-resistant data transmission — ideal fo...

SKU: DF-TEL0163

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 10 Mbps downlink and 5 Mbps uplink. It's compatible with Arduino, Raspberry Pi, a...

SKU: DF-FIT0992

This is an uninterruptible power supply (UPS) expansion board specifically designed for Raspberry Pi 5 Single Board Computer. It can be used as a mobile power supply, providing a stable 5V output with a maximum of 5A.Its enhanced power management system can intelligently monitor the power status ...

SKU: DF-DFR1125 · MPN: DFR1125

The DFRobot 14" 4K IPS Bar Touch Display is a uniquely shaped secondary monitor with a 3.5:1 aspect ratio and 3840×1100 resolution. Designed to sit above or below your main screen, it provides a dedicated space for stock tickers, system monitoring, chat windows, media timelines, or any content th...

SKU: WS-29266 · MPN: 29266

Waveshare RP2350-ETH Mini Development BoardUnlock new possibilities in the world of IoT and embedded systems with the Waveshare RP2350-ETH Mini Development Board. This compact yet powerful board is designed to bridge your projects to the internet, offering a seamless connection through its onboar...

SKU: PL-3753

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO header in the HAT form factor and includes an integrated 5V 2.5A step-down regu...

SKU: DF-DFR1193 · MPN: DFR1193

The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address conversion happens in hardware with no code changes required. Key Features Ha...

SKU: LB-LR0040

This versatile soil moisture sensor is designed for easy integration with both Arduino and Raspberry Pi projects, making it a great choice for hobbyists and developers alike. It features both analog and adjustable digital outputs, allowing for fine-tuned control and monitoring of soil moisture...

SKU: DF-SEN0220

The Gravity UART Infrared CO2 Sensor uses non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations from 0 to 50,000 ppm. It offers excellent selectivity with no oxygen dependency, built-in temperature compensation, and a service life of over 5 years. The UART interface m...

SKU: DF-SEN0193

The Gravity Analogue Capacitive Soil Moisture Sensor measures soil moisture using capacitive sensing rather than resistive probes, providing significantly better corrosion resistance and longer service life. Made from corrosion-resistant material for reliable long-term use in soil. An onboard vo...

SKU: AF-593

The MCP23008 is an I2C 8-bit I/O port expander that adds 8 general-purpose pins to your microcontroller using just two I2C lines (shared with other I2C devices). Each pin can be configured as input, output, or input with internal pull-up, and an external interrupt output notifies you when any inp...

SKU: DF-SEN0171

A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...

SKU: DF-SEN0170

A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion resistance for long-term outdoor deployment. The anemometer features a built-in ...

SKU: AF-1736

Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black or other mini-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a USB cable and is compatible with all operating systems. We tried many keyboards to find one that felt good for every-day u...

SKU: AF-1738

Add a good quality, slim chiclet keyboard as well as an optical mouse to your Raspberry Pi, Beagle Bone Black or other mini-computer with this wireless combo set. Best of all, it only uses a single USB port! This combo comes with a sleek black chiclet keyboard and and mouse both controlled by ...

SKU: DF-SEN0288

A non-contact AC current sensor with a clamp-on transformer probe, capable of measuring 0–10 A AC. Simply clamp the probe around an AC line and connect the 3.5 mm plug to the signal conversion module — no wire cutting or circuit modification required. The Gravity analogue interface outputs a 0.2...

SKU: DF-SEN0328

The TF03 is an industrial-grade LiDAR sensor with a detection range of up to 100 m. Using pulsed time-of-flight (ToF) measurement, it delivers high accuracy in a compact 44 × 43 × 32 mm package weighing just 77 g. Its IP67-rated aluminium alloy enclosure makes it suitable for demanding outdoor an...

SKU: DF-FIT0730

The 2-Megapixel USB Night Camera features a Sony IMX291 sensor with exceptional low-light performance down to 0.0001 Lux. It delivers 1920×1080 video at 30fps (MJPG) and includes a built-in digital microphone that captures audio within a 5-metre range. The camera is driver-free (UVC compliant), ...