All Products
Showing 41-56 of 56 products · 4 unavailable products hidden
Rectangle-shaped All-in-One Capacitive Fingerprint Sensor (E), Cortex Processor, UART
An all-in-one capacitive fingerprint sensor module with a built-in Cortex processor and commercial-grade fingerprint algorithm. Simply send UART commands to enrol, match, and manage fingerprints — no knowledge of fingerprint algorithms required. The compact rectangle form factor integrates the pr...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
Gravity: Arduino Analog Capacitive Soil Moisture Sensor- Corrosion Resistant
The Gravity Analogue Capacitive Soil Moisture Sensor measures soil moisture using capacitive sensing rather than resistive probes, providing significantly better corrosion resistance and longer service life. Made from corrosion-resistant material for reliable long-term use in soil. An onboard vo...
Adafruit SHT41 Trinkey - USB Temperature and Humidity Sensor
·
The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading environmental data — no wiring, soldering, or driver installation required. Th...
ESP32-S3 Type B Development Board – 3.5" Capacitive Touch IPS Display, 320x480, Wi-Fi & Bluetooth 5
·
An ESP32-S3 development board with a built-in 3.5" IPS capacitive touchscreen display (320×480, 262K colours). Powered by the dual-core Xtensa LX7 processor running at up to 240 MHz with Wi-Fi and Bluetooth 5 (LE) connectivity, this board is designed for interactive IoT devices, smart home interf...
Hackster & DFRobot EEDU Enviromental Sensor Kit (ESP32)
The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both communication and backlight control. The display supports 2 rows of 16 charact...
ESP32-S3 Round Display Dev Board – 2.1" Capacitive Touch, 480x480 IPS, Wi-Fi & Bluetooth
·
ESP32-S3 2.1inch Capacitive Touch Round Display Development BoardUnleash Your Creativity with Cutting-Edge TechnologyUnveiling the ultimate tool for innovators, the ESP32-S3 Round Display Development Board – your perfect companion for designing and prototyping next-gen smart devices. Dive into th...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...
Hackster and DFRobot IoT Starter EEDU Kit (ESP32)
An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...
DFRobot SEN0715 Miniature Non-Contact Liquid Level Sensor
·
This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when monitoring aggressive liquids such as strong acids, alkalis and toxic liquids in ...
Gravity: I2C HUB
This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project building, for instance, use Gravity-4P I2C/UART sensor cable to connect with Gravity modules or use Jumper Wire to c...
