All Products

SKU: AF-161

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side of the photo cell (either one, its symmetric) to power (for example 5V) and the o...

SKU: DF-SEN0121

This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notice:The new version of analog sensor port pin mapping has been changed as the foll...

SKU: DF-DFR0407

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagnetic sensor, and a 32-bit microcontroller running BSX3.0 FusionLib software. The B...

SKU: DF-DFR0028

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus not making a connection. Here is the principle of tilt sensor to illustrate how i...

SKU: DF-SEN0160

A digital weight sensor kit based on the HX711 24-bit ADC, capable of measuring up to 1 kg. The HX711 is designed specifically for weight scale applications, interfacing directly with a bridge sensor to deliver precise, reliable measurements via the Gravity interface. The kit includes both the H...

SKU: WS-26379

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2040. Tailored for various application scenarios, this development board boasts a...

SKU: DF-SEN0287

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circuits. Simply clamp the AC transformer probe on the AC line, and then plug the 3.5...

SKU: DF-SEN0198

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temp...

SKU: DF-DFR0052

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the extent of vibration. Different from digital vibration sensor that only accounts...

SKU: DF-SEN0211

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Pl...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-SEN-08606

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad! The resistance of the flex se...

SKU: DF-DFR0888-12

Shine like rainbows, this full-color RGB LED Ring with an exquisite and cool appearance could be a great partner for your interactive applications. Add it to your project to brighten your creativity!Small in size, these LED beads come in a variety of colors and can be cascaded. Only one signal li...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: DF-DFR0888-24

Shine like rainbows, this full-color RGB LED Ring with an exquisite and cool appearance could be a great partner for your interactive applications. Add it to your project to brighten your creativity!Small in size, these LED beads come in a variety of colors and can be cascaded. Only one signal li...

SKU: EC-MCA03328A

The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial communication, 14 digital I/O pins (6 with PWM), and 8 analogue inputs. Power i...

SKU: DF-DFR0029-W

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, esp...