All Products

SKU: AF-2045

The Adafruit Si5351A Clock Generator Breakout lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. With a precision 25 MHz crystal reference and internal PLLs and dividers, it eliminates the need to hunt for specific crystals or oscillato...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-815

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from your microcontroller. Ideal for controlling servos, LEDs, or any PWM-driven device....

SKU: AF-2019

The Adafruit MMA8451 is a high-precision triple-axis accelerometer with a built-in 14-bit ADC, offering selectable measurement ranges of ±2g, ±4g, and ±8g. Designed by Freescale (now NXP), this sensor detects motion, tilt, and basic orientation — it can even tell you whether your project is in la...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: AF-1980

The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-spectrum, or human-visible light for accurate lux calculations across an enormous...

SKU: AF-3464

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as keyboard inputs once you run the Adafruit installer script. No soldering requir...

SKU: AF-3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: AF-3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: AF-3435

The Adafruit TPL5110 Low Power Timer Breakout turns any electronics project into a low-power system by periodically switching power on and off. Connect it between your power supply and your project, and the TPL5110 will handle the rest — powering up your circuit at configurable intervals from eve...

SKU: AF-3444

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire SPI interface using just two digital I/O pins — data and clock. Each LED deliv...

SKU: AF-3421

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to your microcontroller — eliminating analogue noise and the need for an ADC. With...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-1899

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's a reliable and affordable choice for environmental monitoring projects. This b...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-1895

The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEPROM — data is written instantly and retained for up to 95 years at room temperat...

SKU: AF-3387

Add motion, direction and orientation sensing to your project with this all-in-one 9-DOF sensor from Adafruit. The LSM9DS1 from ST Micro combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope into a single chip — the updated successor to the LSM9DS0. The breakout board include...

SKU: AF-746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: AF-3377

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...