All Products

SKU: WS-30901 · MPN: 30901

Power your Raspberry Pi 5 or Compute Module 5 over Ethernet with this PoE HAT (H). Deliver both power and network connectivity through a single Ethernet cable—perfect for remote installations, clean setups, and locations without easy access to power outlets. The HAT features an isolated switched-...

SKU: WS-29927 · MPN: 29927

Transform your D-Robotics RDK X5 development board into a powerhouse of connectivity and reliability with the latest Power Over Ethernet Expansion Board. Designed to seamlessly integrate with the RDK X5, this PoE module not only simplifies your network setup by combining data and power into a sin...

SKU: AF-3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: SF-GPS-26289 · MPN: GPS-26289

The SparkPNT GNSSDO is a high-performance timing receiver and disciplined oscillator for extremely stable, traceable time in labs, networks and field deployments. It is built around the Septentrio mosaic-T platform and a SiTime SiT5358 Super-TCXO, combining multi-constellation GNSS timing with a ...

SKU: DF-DFR0342

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It en...

SKU: SF-DEV-26586 · MPN: DEV-26586

The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-based wired Ethernet.The board pinout is directly connected to the RP2040 GPIO an...

SKU: SF-WRL-16781

The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Tensilica LX6 at 240 MHz. Simply align the keyed edge connector with any MicroMod...

SKU: AF-5900 · MPN: ADA5900

The Adafruit ESP32 Feather V2 with Headers is identical to the standard ESP32 Feather V2 but comes with pin headers pre-soldered, so you can plug it directly into a breadboard or socket straight away. Built around the dual-core ESP32 at 240 MHz with 8 MB flash and 2 MB PSRAM, it includes USB-C, L...

SKU: DF-DFR1075 · MPN: DFR1075

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standard, making it one of the most connectivity-versatile ESP32 boards available. Wit...

SKU: WS-31623 · MPN: 31623

This product is a high-performance, highly integrated MCU board designed by Waveshare, features ESP32-S3 and ESP32 dual MCUs control, integrated large-capacity Flash and PSRAM. Onboard 1.8inch touch LCD screen and multiple peripherals such as audio decoder chip and knob encoder, enabling rapid de...

SKU: DF-DFR1248 · MPN: DFR1248

Designed specifically for the LattePanda IOTA single-board computer, this expansion board adds IEEE 802.3bt PoE++ power and Gigabit Ethernet data over a single Ethernet cable. It can deliver up to 51W, helping simplify installations where a separate power adaptor would be awkward or where periphe...

SKU: AF-4552

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...

SKU: WS-25081

A compact ESP32-S3 development board based on the ESP32-S3FH4R2 dual-core processor running at up to 240MHz. Features 4MB flash, 2MB PSRAM, 2.4GHz Wi-Fi (802.11 b/g/n), and Bluetooth 5 (LE). The castellated module design with on-board ceramic antenna allows direct soldering to carrier boards, mak...

SKU: WS-25376

Full metal body · Onboard ESP32-WROOM-32 · Multiple host support The WAVE ROVER is a rugged, all-metal 4WD robot chassis for makers, students and researchers who want a capable mobile platform without building one from scratch. Its entire codebase is open source, it ships with an onboard ESP32 co...

SKU: SF-WRL-24806 · MPN: WRL-24806

The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V core clocked up to 160 MHz plus a low-power RISC-V core at 20 MHz, it offers stro...

SKU: WS-30939 · MPN: 30939

A compact ESP32-S3 development board with a built-in 1.9-inch LCD display (170 × 320, 262K colours), 6-axis IMU, TF card slot, and lithium battery charging. Powered by the ESP32-S3R8 dual-core processor with Wi-Fi and Bluetooth 5.0, it supports development via Arduino IDE, ESP-IDF, and the LVGL g...

SKU: WS-29320 · MPN: 29320

A dual-function HAT for Raspberry Pi 5 that adds M.2 NVMe SSD support via the Pi's PCIe interface and delivers Power over Ethernet (PoE) — combining fast storage and single-cable power/networking into one board. Supports M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 sizes with Gen2 and Gen3 operat...

SKU: DF-DFR0144

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each relay has its own test button and LED status indicator. The shield features a b...

SKU: WS-31137 · MPN: 31137

An ESP32-S3 development board with a built-in 3.5" IPS capacitive touchscreen display (320×480, 262K colours). Powered by the dual-core Xtensa LX7 processor running at up to 240 MHz with Wi-Fi and Bluetooth 5 (LE) connectivity, this board is designed for interactive IoT devices, smart home interf...

SKU: WS-26399

Introducing the POE HAT for Raspberry Pi 5: Simplify Connectivity and Power!High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard Power Over Ethernet (PoE) HAT designed for Raspberry Pi 5, compliant with IEEE 802.3af/at network standards, offering a seamles...