All Products

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: SF-SEN-11827

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the on...

SKU: DF-FIT0374

INTRODUCTION Are you still looking for a UHF RFID tag for your UHF RFID reader? Try this one, this UHF tag accords with ISO 18000-6C,EPC Class1 Gen2 standard protocol. It contains 96 bit EPC space and 512 bit user space. Carrier frequency could arrive 860~960MHz. It is ...

SKU: AF-4033 · MPN: 4033

This blank 13.56 MHz RFID/NFC white tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact white disc form factor is commonly used for laundry tracking, garment identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no battery is...

SKU: SF-SEN-11828

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the on...

SKU: AF-361 · MPN: 361

This blank 13.56 MHz RFID/NFC clear tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. The transparent housing makes the embedded antenna coil visible. The chip and antenna are passively powered — no battery is needed. The tag contai...

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: SF-SEN-11862

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple to use RFID reader module from ID Innovations. The only holdups are the 2mm pin...

SKU: SF-CAB-22035

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connecti...

SKU: AF-4701 · MPN: 4701

The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This makes it ideal for projects where you need to change tag content on the fly — for ex...

SKU: SF-WRL-24936

The ThingMagic M7E UHF RAIN RFID Module Series has all the features you’ve come to expect with the M6e Module Series and more! Unique to the M7E Series, the M7E-Hecto modules are some of the smallest on the market and have high sensitivity, efficient power utilization and fast read rates, allowin...

SKU: AF-360 · MPN: 360

This blank 13.56 MHz RFID/NFC white tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. It contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The chip and antenna are passively powered — no battery is needed. The ...

SKU: AF-4643 · MPN: 4643

This is a great connector for anyone doing RF work, when a right angle RP-SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.Mates wi...

SKU: AF-921 · MPN: 921

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the bracelet a few centimetres from a compatible 13.56 MHz RFID/NFC reader to read or wri...

SKU: AF-4034 · MPN: 4034

This blank 13.56 MHz RFID/NFC card contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The standard credit-card-sized form factor makes it suitable for access badges, information sharing, and NFC prototyping. The embedded chip and antenna are passively powered — no battery is need...

SKU: AF-4032 · MPN: 4032

This blank 13.56 MHz RFID/NFC sticker contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The thin adhesive-backed form factor (4 × 2.5 cm) makes it easy to apply to equipment, packaging, shelves, or any smooth surface. The embedded chip and antenna are passively powered — no batt...

SKU: SF-WRL-00593

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

SKU: AF-2800 · MPN: 2800

A micro-sized NFC/RFID transponder built around the NXP NTAG203 chip operating at 13.56 MHz. Its tiny, flexible form factor makes it ideal for embedding into rings, wearables, keychains, and other compact devices where full-sized NFC tags won't fit. The tag provides 144 bytes of read-write memor...

SKU: AF-6441 · MPN: ADA6441

These use an NTAG chipset, a 'Type 2' tag usable with any smartphone. Unlike "Classic 1K" cards (a.k.a. MiFare S50s), these tags are more secure and work with almost any phone with RFID support, since they avoid the patent issues with MiFare, which require an NXP chipset or a license fee.One of e...

SKU: AF-359 · MPN: 359

This blank 13.56 MHz RFID/NFC card contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The standard credit-card-sized form factor (ISO 7810 ID-1) makes it suitable for access control badges, identification systems, and RFID prototyping. The embedded chip and antenna are passiv...