All Products

SKU: SF-DEV-18771

The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. This "copy protection" variant comes with additio...

SKU: WS-27541

  PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HATExtends 1x Gigabit Ethernet Port Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Be...

SKU: PR-PIM266

Four Letter pHAT is a Raspberry Pi add-on with four 14-segment displays in a retro green LED style, driven by an HT16K33 chip over I2C. It can display text, numbers, and a range of special characters — perfect as a readout for temperatures, times, or sensor values from boards like Enviro pHAT or ...

SKU: AF-3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: AF-4763

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order-of megabytes, with little cost and complexity. We use these chips all the time ...

SKU: PR-PIM183

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you in...

SKU: SF-DEV-13746

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...

SKU: PR-PIM376

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rovers, or anywhere else where you want to measure motion accurately. It's compatib...

SKU: LB-00349

The Raspberry Pi Zero W Basics Kit includes the Pi Zero W single-board computer along with essentials to get started. The Pi Zero W adds built-in WiFi and Bluetooth to the compact Pi Zero form factor, making it ideal for lightweight IoT projects, headless servers, and embedded applications. Key ...

SKU: PR-PIM357

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic...

SKU: SF-DEV-15583

Teensy 4.0: High Performance in a Compact Form The Teensy 4.0 is a powerful, compact development board measuring just 1.4" × 0.7". It features the blazing-fast 600 MHz ARM Cortex-M7 processor, built on the NXP iMXRT1062 chip — currently the fastest microcontroller available. Maintaining the same ...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...

SKU: PI-COM0211

Take control of your voltage! These regulators will let you produce a reliable constant supply voltage for your circuits. Whether you're working from an unregulated supply or just need a precise voltage for your micro-controller we've selected a couple of great general purpose options. OutputV...

SKU: PR-PIM510

A Raspberry Pi-powered plant monitoring system that tracks moisture levels across up to three pots, alerts you when plants need water, and can even automate watering with optional pumps. The kit centres around the Grow HAT Mini, a compact add-on board with a built-in LCD, buttons, buzzer, and lig...

SKU: SF-DEV-15845

This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy. With the audio library you will be able to use both the input and outp...

SKU: AF-1919

These female-to-female jumper wires bridge the gap between standard 2.54 mm (0.1″) pitch headers and smaller 2.0 mm (0.08″) pitch connectors. One end has a 2.54 mm socket and the other has a 2.0 mm socket, making it easy to connect 2.0 mm-pitch devices like XBee modules to breadboards and standar...

SKU: PR-PIM141

The Drum HAT adds 8 capacitive touch drum pads with individual LED indicators to your Raspberry Pi. Use it to play sampled drum sounds, control software drum synths, send MIDI commands to hardware drum machines, or build custom drum-controlled projects — all programmed in Python. Each pad featur...

SKU: PJ-PROP_SHIELD

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors - Allows motion interactive light & sound. Audio Amplifier - Clear quality audio output to a small speaker. Fast LED Driver - Drive APA102 / Dotstar LEDs fo...

SKU: PL-3101

The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP package — even smaller than competing ATmega32U4 boards like the Teensy 2.0 and Pro ...

SKU: SS-103990049

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. this module is compatible with 5V and 3v3.and it can used for upload code or...