All Products

SKU: AF-3672

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...

SKU: AF-1285

The Adafruit Beginner LED Sewing Kit has everything you need to start stitching glowing circuits with conductive thread. No soldering or microcontroller required — the included candle-flicker LEDs twinkle automatically for a warm, animated glow. With enough supplies for two projects with two LED...

SKU: AF-1324

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-safe clothing, but its great for wearable applications as well. For example an o...

SKU: AF-1088

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stu...

SKU: AF-1168

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, plush keypads, capacitive touch sensors, and other textile interfaces for wearabl...

SKU: AF-3670

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics safely deliver comfortable conductive and radiant heating at low voltage thr...

SKU: AF-1657

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-ply conductive thread, alligator clips to help you test out your circuit, and a U...

SKU: DF-FIT0807

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...

SKU: AF-1127

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adh...

SKU: AF-1128

This Copper Foil Tape features a thin, pure copper construction with an electrically conductive adhesive backing. Extremely flexible and easy to work with, it can be cut to shape with scissors and soldered directly for reliable electrical connections. The conductive adhesive on the back makes it...

SKU: AF-1656

3M Z-Axis Conductive Tape (9703) bonds two conductive surfaces together while allowing current to flow through the thickness of the tape — but not along its length or width. This anisotropic conductivity is achieved by conductive particles embedded in the adhesive approximately every 0.1mm, makin...

SKU: SF-PRT-13828

A wide roll of copper tape with conductive adhesive backing. At 50.8 mm (2″) wide and 15.2 m (50 ft) long, this tape is suitable for creating low-profile traces, RF shielding, antenna construction, and paper circuit projects. The conductive adhesive ensures electrical continuity through overlappi...

SKU: AF-3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: LB-PT101011M-20

A 20-metre roll of 20mm wide copper foil tape with double-sided conductive adhesive. The low-resistance copper provides excellent conductivity for electrical projects, EMI shielding, paper circuits, and even garden slug deterrence. The tape is flexible enough to twist, bend, and tear to fit any s...

SKU: AF-3960

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: LB-PT101011M

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding, antenna construction, and paper circuit projects. The narrow 5 mm width is wel...

SKU: WS-31455 · MPN: 31455

A compact, lightweight mini tripod designed for the DJI Pocket 3 and other small cameras or devices. It folds down to just 82 mm and weighs only 30 g, making it easy to toss in a bag for on-the-go shooting. The three-axis locking legs provide stable support for devices up to 1.3 kg. Key Features...

SKU: SF-COM-11973

This heavy-duty 16 mm metal pushbutton features a latching (on/off) mechanism with an illuminated green LED ring. Built from stainless steel with an IP65 weatherproof rating, it is designed for panel-mount applications where durability and tamper resistance are essential. The button uses an SPDT...

SKU: AF-3096

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the ready such as these Rhino SW-11 Tweezers! They are sharp, straight, and super luxurious. These  are our favorite pair of small-component-grabbing tweez...

SKU: LB-LR0309-36

A 120-piece M2.5 brass standoff kit with a mix of female-female spacers, male-female spacers, stainless steel screws, and nuts — all organised in a reusable plastic storage box. M2.5 is the standard mounting size for Raspberry Pi, many single-board computers, and PCB mounting applications. The k...