All Products

SKU: DF-SER0038

DSS-M15S is a heavy-duty metal gear standard servo with 270°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 270°servo will never let you down when you need it. Tested with high load capacity for...

SKU: LB-LS7259-180

A durable 9G micro servo with full metal gears and 180° rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact builds. Key Features Full Metal Gears – Increased durability and longevity 180° Rotation...

SKU: SF-ROB-18591

The Actuonix PQ12-100-6-R is a micro linear actuator with a servo-compatible PWM interface. Weighing just 22 grams with a 20mm stroke, it delivers up to 50N (~5 kg) of force thanks to its 100:1 gear ratio — making it one of the most powerful actuators of its size. The PQ12-R series operates as a...

SKU: SF-PGM-30117 · MPN: PGM-30117

This handheld tool configures REV Smart Robot Servos (SRS) and tests standard RC servos without needing a separate controller. It is built for quick setup at the bench, in the workshop or in a competition toolkit.For SRS units, it gives direct access to operating modes such as continuous rotation...

SKU: DF-FIT0520

A 6V brushed DC motor with a 20:1 metal gearbox and an integrated quadrature encoder. The encoder provides 11 counts per revolution of the motor shaft, corresponding to 224.4 counts per revolution of the gearbox output — giving precise speed and position feedback for closed-loop motor control. T...

SKU: SF-ROB-11965

A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...

SKU: SF-ROB-09065

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...

SKU: LB-LS7259-360

A durable 9G micro servo with full metal gears and 360° continuous rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact builds. Key Features Full Metal Gears – Increased durability and longevity 36...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: AF-2201

This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much.  It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller.  You can use an...

SKU: SF-ROB-18648

The Arducam Upgraded Camera Pan Tilt Platform provides a lightweight, sturdy two-axis mount for cameras commonly used with Arduino and Raspberry Pi. Two digital servos deliver smooth pan and tilt movement, while an included I²C controller board makes integration with your favourite microcontrolle...

SKU: PL-1383

Overview The Pololu Simple Motor Controllers are versatile, general-purpose motor controllers for brushed, DC motors. A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control appli...

SKU: DF-ROB0143

The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain range. And every finger has spring damping structure, it will protect the...

SKU: AF-169

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor contro...

SKU: LB-SERVO-3003

High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break, and offers versatility when installing the servo hornNylon gearsSpecifications...

SKU: LB-PT-SERVO

A compact 9 g continuous rotation micro servo that spins 360° in either direction, rather than moving to a fixed position like a standard servo. Control it with any servo library, code, or hardware — just set the signal to control speed and direction. Perfect for beginners who want to add moveme...

SKU: PL-1121

A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...

SKU: AF-2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: DF-FIT0335

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...

SKU: M5-A046

1. Grove to GroveGROVE 2 GROVE is a GROVE extension connector. Two female GROVE port sit back-to-back.  One common use of this part is for the RGB LED strip extension. Feature:GROVE-to-GROVERGB LED strip extensionpackage includes: 5x connector2. Grove to PinGROVE 2 PIN is a GR...